You are currently viewing Actives

SFP transceiver for IEEE C37.94 teleprotection, 2Mb/s, single mode, 60km

Coretek CT-0155TSP series

MPN:

CT-0155TSP-MB7L-E 2M

Manufacturer L3 Communications

Coretek

Description:

The CT-0155TSP-MB7L-E 2M from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for 2Mb/s. It operates with +3.3V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of 1310nm and complies with multi-source agreement (MSA) small form factor pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide an IEEE C37.94 / IEC 62843 link for 2Mb/s long-reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Features:

  • 1310nm FP LD
  • Data rate: 2Mb/s, NRZ
  • Single +3.3V power supply
  • RoHS compliant and lead-free
  • AC/AC differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor pluggable (SFP)
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Duplex LC connector
  • Compatible with IEEE C37.94 / IEC 62843 standard

SFP transceiver for IEEE C37.94 teleprotection, 2Mb/s, single mode, 40km

Coretek CT-0155TSP series

MPN:

CT-0155TSP-MB6L-E 2M

Manufacturer L3 Communications

Coretek

Description:

The CT-0155TSP-MB6L-E 2M from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for 2Mb/s. It operates with +3.3V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of 1310nm and complies with multi-source agreement (MSA) small form factor pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide an IEEE C37.94 / IEC 62843 link for 2Mb/s long-reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Features:

  • 1310nm FP LD
  • Data rate: 2Mb/s, NRZ
  • Single +3.3V power supply
  • RoHS compliant and lead-free
  • AC/AC differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor pluggable (SFP)
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Duplex LC connector
  • Compatible with IEEE C37.94 / IEC 62843 standard

SFP transceiver for IEEE C37.94 teleprotection, 2Mb/s, single mode, 80km

Coretek CT-0155TSP series

MPN:

CT-0155TSP-KB8L-E 2M

Manufacturer L3 Communications

Coretek

Description:

The CT-0155TSP-KB8L-E 2M from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for 2Mb/s. It operates with +3.3V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of 1550nm and complies with multi-source agreement (MSA) small form factor pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide an IEEE C37.94 / IEC 62843 link for 2Mb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Features:

  • 1550 nm DFB LD
  • Data rate: 2Mb/s, NRZ
  • Single +3.3V power supply
  • RoHS compliant and lead-free
  • AC/AC differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor pluggable (SFP)
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Duplex LC connector
  • Compatible with IEEE C37.94 / IEC 62843 standard

SFP transceiver for IEEE C37.94 teleprotection, 2Mb/s, single mode, 120km

Coretek CT-0155TSP series

MPN:

CT-0155TSP-KBAL-E 2M

Manufacturer L3 Communications

Coretek

Description:

The CT-0155TSP-KBAL-E 2M from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for 2Mb/s. It operates with +3.3V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of 1550nm and complies with multi-source agreement (MSA) small form factor pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide an IEEE C37.94 / IEC 62843 link for 2Mb/s long-reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Features:

  • 1550 nm DFB LD
  • Data rate: 2Mb/s, NRZ
  • Single +3.3V power supply
  • RoHS compliant and lead-free
  • AC/AC differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor pluggable (SFP)
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Duplex LC connector
  • Compatible with IEEE C37.94 / IEC 62843 standard

Six-channel, 4K60Hz video QSFP+ transceiver – Quad transmit and bi-directional channel

Coretek CT-6025VQT-CB4L

MPN:

CT-6025VQT-CB4L

Manufacturer L3 Communications

Coretek

Description:

The CT-6025VQT-CB4L QSFP+ optical transceiver from Coretek Opto. Corp., is a high performance and cost-effective solution to optically multiplex and transmit 4K60Hz video signals. It provides four transmit channels for video signal transmission and two channels (one transmit and one receive) for data signal transmission.

For video signals, this transceiver uses one TOSA, composed of four channels of CWDM DFB LD with different wavelengths to optically multiplex video signals and transmit them via a single mode fibre. Each channel supports 6Gb/s at up to 10km. For data signals, this transceiver uses a 2.5Gb/s bi-directional OSA to send and receive data signals via a second single fibre.

By adopting the standard QSFP+ LC dual core package with pin configuration adjusted for video signals, the CT-6025VQT-CB4L is a highly reliable solution optimised for 4K60Hz applications.

Features:

    • Video-dedicated transceiver
    • Hot-pluggable QSFP+ form factor
    • One quad-TOSA and BOSA:
      • 4 x 6Gb/s CWDM uncooled DFB channels (1270nm, 1290nm, 1310nm, 1330nm)
      • 1 x 2.5Gb/s Bi-Directional (1310nm Tx / 1550nm Rx)
    • Up to 10km on SMF
    • Power dissipation <4.0W
    • Duplex LC connector
    • Single +3.3V power supply
    • Commercial temperature range -10°C to 70°C
    • RoHS-6 compliant (lead-free)

Six-channel, 4K60Hz video QSFP+ transceiver – Quad receive and bi-directional channel

Coretek CT-6025VQR-CB4L

MPN:

CT-6025VQR-CB4L

Manufacturer L3 Communications

Coretek

Description:

The CT-6025VQR-CB4L QSFP+ optical transceiver from Coretek Opto. Corp., is a high performance and cost-effective solution to optically de-multiplex 4K60Hz video signals. It provides four receive channels for receiving and de-multiplexing video signals and two channels (one transmit and one receive) for data signal transmission.

For video signals, this transceiver uses one ROSA, composed of four channels of PIN detector with TIA and thin film filter for different wavelengths to optically de-multiplex video signals transmitted via a single mode fibre. Each channel supports 6Gb/s at up to 10km. For data signals, this transceiver uses a 2.5Gb/s bi-directional OSA to send and receive data signals via a second single fibre.

By adopting the standard QSFP+ LC dual core package with pin configuration adjusted for video signals, the CT-6025VQR-CB4L is a highly reliable solution optimised for 4K60Hz applications.

Features:

    • Video-dedicated transceiver
    • Hot-pluggable QSFP+ form factor
    • One quad-ROSA and BOSA:
      • 4 x 6Gb/s PIN-TIA channels (1270nm, 1290nm, 1310nm, 1330nm)
      • 1 x 2.5Gb/s Bi-Directional (1550nm Tx / 1310nm Rx)
    • Up to 10km on SMF
    • Power dissipation <4.0W
    • Duplex LC connector
    • Single +3.3V power supply
    • Commercial temperature range -10°C to 70°C
    • RoHS-6 compliant (lead-free)

Intel® Apollo Lake-I processor-based ultra compact embedded platform

Adlink MXE-210

MPN:

MXE-210

Manufacturer L3 Communications

ADLINK

Description:

Adlink is pleased to announce our newest IIoT-ready platform, the MXE-210. With dual functionality as a gateway and controller, the palm-size MXE-210 Series is industrial grade EMC-certified and fully operational in environments from -40°C to 85°C. The robust and reliable MXE-210 series supports a broad range of applications including transportation, industrial automation, agriculture, aquaculture, smart city, and more. 

The MXE-210 series provides high expansion capability, multiple wireless connectivity, and comprehensive security for IIoT use. Based on the Intel® Atom x7-E3950/x5-E3930 processor, the MXE-210 Series is compatible to AWS Greengrass, Microsoft Azure IoT Edge, PrismTech VORTEX Edge Connect to deliver edge computing capability. With rich I/O, the MXE-210 Series supports a wide range of communication protocols for data exchange and control, as well as DDS (Data Distribution Service). And hardware and software integrity are assured with TPM 2.0, Intel® Boot Guard, and Secured Boot.

Features:

  • 3-min value props overview

    Compact, robust and reliable construction

  • Minimum footprint (A6 palm size)
  • Wide temperature support from -40°C to 85°C
  • Industrial grade EMC standard EN61000-6-4/2 certified; EN 50155 EMC compliance
  • IIoT-ready

  • Compatible with a wide range of communication protocols such as Modbus, EtherCAT, DDS, MQTT, CANbus, CANOpen for data exchange by Vortex Edge Connect
  • Supports Wi-Fi, BT, LoRa, 3G and 4G LTE wireless connectivity
  • Simplify global cellular IoT deployments with eSIM (embedded SIM) for more rugged and secure design
  • Security building blocks

  • Built-in TPM 2.0 (Trusted Platform Module) provides hardware-based security
  • Intel® Boot Guard and Secure Boot features provide the protection of preventing unauthorized software and malware takeover from Boot to OS

Industrial ATX motherboard with 6th/7th Gen Intel Core® i7/i5/i3 processor

Adlink IMB-M43H

MPN:

0000008RVQ

Manufacturer L3 Communications

ADLINK

Description:

Adlink is pleased to announce that the latest ATX industrial motherboard IMB-M43H now released. 

IMB-M43H is an ATX motherboard supporting the Desktop 6th and 7th Generation Intel Core® i7/i5/i3 Processors with Intel® H110 Chipset, providing the most cost-competitive solution anywhere in embedded computing and fulfilling the specific needs of all users requiring 5 PCI add-on cards. With high-speed data transfer interfaces such as PCIe 3.0/2.0, USB 3.0, and SATA 6 Gb/s (SATA III), dual-channel DDR4 memory up to 32 GB in two DIMM slots for industrial automation applications, the ADLINK IMB-M43H carries significant competitive advantage in the market. This leading, rugged I/O design enhances user experience with robust device compatibility, durable connectivity, and extreme environment readiness.

Features:

  • 6th (Sky Lake)/7th (Kaby Lake) Gen Intel Corei CPU
  • 6th Gen Intel Corei CPU supports OS windows 7
  • Up to 32 GB Dual-channel DDR4 2133/2400 MHz
  • 5xPCI+2xPCIe for automation application
  • Rugged I/O
  • Unique power design to ensure stable USB power of 5V ±5%
  • IEC 61000-4-2~6 (Performance Criterion A), CE/FCC class B Certified D

M material, high-permability ferrite, toroid, 2152 AI, 15000 permeability, parylene

Magnetics M Material

MPN:

YM-40502-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 2963 AI, 15000 permeability, parylene

Magnetics M Material

MPN:

YM-40601-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 12535 AI, 15000 permeability, bare

Magnetics M Material

MPN:

0M-40705-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 6199 AI, 15000 permeability, parylene

Magnetics M Material

MPN:

YM-40603-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 6199 AI, 15000 permeability, bare

Magnetics M Material

MPN:

0M-40603-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 6644 AI, 15000 permeability, bare

Magnetics M Material

MPN:

0M-41003-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 12535 AI, 15000 permeability, parylene

Magnetics M Material

MPN:

YM-40705-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 6644 AI, 15000 permeability, epoxy

Magnetics M Material

MPN:

ZM-41003-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 9988 AI, 15000 permeability, epoxy

Magnetics M Material

MPN:

ZM-41005-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 9988 AI, 15000 permeability, bare

Magnetics M Material

MPN:

0M-41005-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 6644 AI, 15000 permeability, parylene

Magnetics M Material

MPN:

YM-41003-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 17163 AI, 15000 permeability, bare

Magnetics M Material

MPN:

0M-41206-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 9988 AI, 15000 permeability, parylene

Magnetics M Material

MPN:

YM-41005-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 17163 AI, 15000 permeability, parylene

Magnetics M Material

MPN:

YM-41206-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 8476 AI, 15000 permeability, epoxy

Magnetics M Material

MPN:

ZM-41306-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 8476 AI, 15000 permeability, bare

Magnetics M Material

MPN:

0M-41306-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 10974 AI, 15000 permeability, epoxy

Magnetics M Material

MPN:

ZM-41406-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 8494 AI, 15000 permeability, epoxy

Magnetics M Material

MPN:

ZM-42206-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 7917 AI, 15000 permeability, epoxy

Magnetics M Material

MPN:

ZM-41605-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 17313 AI, 15000 permeability, epoxy

Magnetics M Material

MPN:

ZM-42212-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

M material, high-permability ferrite, toroid, 11072 AI, 15000 permeability, epoxy

Magnetics M Material

MPN:

ZM-42507-TC

Manufacturer L3 Communications

Magnetics Inc

Description:

M material is a new, high-permeability (15,000µ) material designed for optimum impedance performance across frequency ranges. High-permeability ferrite materials provide superior loss factor, frequency response, temperature performance and product consistency. M material is suitable for signal, choke, and filter applications such as common mode chokes, EMI suppression filters, signal processing and broadband transformers.

BX3105 Wi-Fi and Bluetooth combo module with embedded antenna

Sierra Wireless BX3105

MPN:

BX3105

Manufacturer L3 Communications

Sierra Wireless

Description:

The BX3105 Wi-Fi and Bluetooth 4.2 pre-certified module offers simple and fast integration with free unlimited FOTA and built-in cloud connectivity from AirVantage®, ideal for quickly and cost effectively adding wireless communication.

This module supports 802.11 b/g/n and dual-mode Bluetooth Classic and Bluetooth Low Energy (BLE), connecting industrial applications requiring a secure connection to Wi-Fi and Bluetooth on a single module.

Designed in an industrial-grade common flexible form factor (CF3®), BX3105 enables system integrators to build their devices on the most scalable module platform in the world.

Features:

  • Hostless – Embedded TCP/IP and Bluetooth Stacks with simple UART interface makes it easy to integrate
  • Certification – Full regulatory certifications (FCC, RED, IC, JRF, and BQB Bluetooth) for faster time to market
  • Common form factor – Compact CF3®, form factor for scalability across technologies including cellular
  • Industrial-grade – Built to stay connected in harsh environments and extreme temperatures
  • Cloud connected – Secure device-to-cloud architecture with AirVantage®
  • FOTA upgrades – Includes FREE unlimited firmware over-the-air (FOTA) upgrades for the lifetime of the module to keep your deployments optimised and easier to maintain
  • Secure boot – Prevents unauthorised code on the target and to keep the connectivity secure
  • Interfaces – Includes UART, I2C, SDIO or SPI (Multiplexed), I2S digital audio and GPIOs
  • Integrated antenna – Quickly and easily add advanced wireless communications
  • Low power – Offers best-in-class low power when not transmitting in sleep and stand-by modes

BX3100 Wi-Fi and Bluetooth combo module

Sierra Wireless BX3100

MPN:

BX3100

Manufacturer L3 Communications

Sierra Wireless

Description:

The BX3100 Wi-Fi and Bluetooth 4.2 pre-certified module offers simple and fast integration with free unlimited FOTA and built-in cloud connectivity from AirVantage®, ideal for quickly and cost effectively adding wireless communication.

This module supports 802.11 b/g/n and dual-mode Bluetooth Classic and Bluetooth Low Energy (BLE), connecting industrial applications requiring a secure connection to Wi-Fi and Bluetooth on a single module.

Designed in an industrial-grade common flexible form factor (CF3®), BX3100 enables system integrators to build their devices on the most scalable module platform in the world.

Features:

  • Hostless – Embedded TCP/IP and Bluetooth Stacks with simple UART interface makes it easy to integrate
  • Certification – Full regulatory certifications (FCC, RED, IC, JRF, and BQB Bluetooth) for faster time to market
  • Common form factor – Compact CF3®, form factor for scalability across technologies including cellular
  • Industrial-grade – Built to stay connected in harsh environments and extreme temperatures
  • Cloud connected – Secure device-to-cloud architecture with AirVantage®
  • FOTA upgrades – Includes FREE unlimited firmware over-the-air (FOTA) upgrades for the lifetime of the module to keep your deployments optimised and easier to maintain
  • Secure boot – Prevents unauthorised code on the target and to keep the connectivity secure
  • Interfaces – Includes UART, I2C, SDIO or SPI (Multiplexed), I2S digital audio, GPIOs, and LGA pad for external antenna
  • Low power – Offers best-in-class low power when not transmitting in sleep and stand-by modes

Multi-rate SFP transceiver, 1.25 to 4.25Gb/s, 850nm VCSEL, multi mode, 150m, -40 to 85°C

Coretek CT-4250NSP-SE1L-E GD

MPN:

CT-4250NSP-SE1L-E GD

Manufacturer L3 Communications

Coretek

Description:

The CT-4250NSP-SE1L-E GD from Coretek Opto Corp. is a high-performance and cost-effective module for serial optical data communication applications specified for multi-rate from 1.25 to 4.25 Gb/s. It operates with +3.3V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of 1310nm and complies with multi-source agreement (MSA) small form factor pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide Gigabit Ethernet compliant link at 1.25 Gb/s, 10GBASE LX-4 compliant link at 3.125 Gb/s, and fibre channel compliant link at 4.25 Gb/s medium reach applications. The characteristics are performed in accordance with ANSI fibre channel physical interface (FC-PI-2) Rev 7.0.

Features:

  • 850 nm VCSEL LD
  • Multi-rate: from 1.25 to 4.25 Gb/s, NRZ, with rate select
  • Single +3.3V power supply
  • RoHS compliant and lead-free
  • AC/AC differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor pluggable (SFP)
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Duplex LC connector
  • Compliance with ANSI specifications for fibre channel applications
  • Compliance with specifications for 10GBASE LX-4 at 3.125 Gb/s
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gb/s
  • Eye safety designed to meet Laser Class 1 comply with EN60825-1
  • Firmware version: SFP_4G_LRMR-071317 (F912)
  • Applications: Fibre channel links, 10GBASE LX-4, Gigabit Ethernet

Multi-rate SFP transceiver, 1.25 to 4.25Gb/s, 1310nm FP, single mode, 4km, -40 to 85°C

Coretek CT-4250TSP-ME3L-E GD

MPN:

CT-4250TSP-ME3L-E GD

Manufacturer L3 Communications

Coretek

Description:

The CT-4250TSP-ME3L-E GD from Coretek Opto Corp. is a high-performance and cost-effective module for serial optical data communication applications specified for multi-rate from 1.25 to 4.25 Gb/s. It operates with +3.3V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of 1310nm and complies with multi-source agreement (MSA) small form factor pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide Gigabit Ethernet compliant link at 1.25 Gb/s, 10GBASE LX-4 compliant link at 3.125 Gb/s, and fibre channel compliant link at 4.25 Gb/s medium reach applications. The characteristics are performed in accordance with ANSI fibre channel physical interface (FC-PI-2) Rev 7.0.

Features:

  • 1310 nm FP LD
  • Multi-rate: from 1.25 to 4.25 Gb/s, NRZ, with rate select
  • Single +3.3V power supply
  • RoHS compliant and lead-free
  • AC/AC differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor pluggable (SFP)
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Duplex LC connector
  • Compliance with ANSI specifications for fibre channel applications
  • Compliance with specifications for 10GBASE LX-4 at 3.125 Gb/s
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gb/s
  • Eye safety designed to meet Laser Class 1 comply with EN60825-1
  • Firmware version: SFP_4G_LRMR-071317
  • Applications: Fibre channel links, 10GBASE LX-4, Gigabit Ethernet

Multi-rate SFP transceiver, 1.25 to 4.25Gb/s, 1310nm DFB, single mode, 10km, -40 to 85°C

Coretek CT-4250TSP-NE4L-E GD

MPN:

CT-4250TSP-NE4L-E GD

Manufacturer L3 Communications

Coretek

Description:

The CT-4250TSP-NE4L-E GD from Coretek Opto Corp. is a high-performance and cost-effective module for serial optical data communication applications specified for multi-rate from 1.25 to 4.25 Gb/s. It operates with +3.3V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of 1310nm and complies with multi-source agreement (MSA) small form factor pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide Gigabit Ethernet compliant link at 1.25 Gb/s, 10GBASE LX-4 compliant link at 3.125 Gb/s, and fibre channel compliant link at 4.25 Gb/s medium reach applications. The characteristics are performed in accordance with ANSI fibre channel physical interface (FC-PI-2) Rev 7.0.

Features:

  • 1310 nm DFB LD
  • Multi-rate: from 1.25 to 4.25 Gb/s, NRZ, with rate select
  • Single +3.3V power supply
  • RoHS compliant and lead-free
  • AC/AC differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor pluggable (SFP)
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Duplex LC connector
  • Compliance with ANSI specifications for fibre channel applications
  • Compliance with specifications for 10GBASE LX-4 at 3.125 Gb/s
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gb/s
  • Eye safety designed to meet Laser Class 1 comply with EN60825-1
  • Firmware version: SFP_4G_LRMR-071317
  • Applications: Fibre channel links, 10GBASE LX-4, Gigabit Ethernet

2x6 SFF transceiver, SC-RJ connector, 1 mm POF and 200 μm HCS, Tx squelch

CT-0125NPF-R41C-E / NSQ

MPN:

CT-0125NPF-R41C-E

Manufacturer L3 Communications

Coretek

Description:

The CT-0125NPF-R41C-E series from Coretek Opto Corp. are the high performance and cost-effective modules for serial optical data communication applications specified for data rates of 125 Mb/s. It operates with +3.3 V power supply. The module is intended for multi-mode fibre, operates at a nominal wavelength of 650 nm and complies with Multi-Source Agreement (MSA) Small Form Factor (SFF) 2x6 foot print.

Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. All of them are housed in a plastic package and the combination produces a reliable component. The module is a transceiver with SC-RJ connector designed for use in Fast Ethernet (100 Mb/s) or Ethernet (10 Mb/s) over 50 metres POF and 100 metres HCS fibre.

Features:

  • 650 nm LED
  • Multi-rate: 10-125 Mb/s, NRZ
  • Single +3.3 V power supply
  • RoHS compliant and lead-free
  • PECL differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor (SFF) 2x6 footprint
  • SC-RJ connector
  • TX optical output power squelch enabled
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Eye safety – designed to meet LED Class 1

  • Applications
  • Fast ethernet
  • FDDI
  • Multi-mode fibre links
  • Optical-electrical interface conversion

2x6 SFF transceiver, SC-RJ connector, 1 mm POF and 200 μm HCS, Tx squelch disabled

CT-0125NPF-R41C-E / NSQ

MPN:

CT-0125NPF-R41C-E NSQ

Manufacturer L3 Communications

Coretek

Description:

The CT-0125NPF-R41C-E NSQ from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data rates of 125 Mb/s. It operates with +3.3 V power supply. The module is intended for multi-mode fibre, operates at a nominal wavelength of 650 nm and complies with Multi-Source Agreement (MSA) Small Form Factor (SFF) 2x6 foot print.

Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. All of them are housed in a plastic package and the combination produces a reliable component. The module is a transceiver with SC-RJ connector designed for use in Fast Ethernet (100 Mb/s) or Ethernet (10 Mb/s) over 50 metres POF and 100 metres HCS fibre.

Features:

  • 650 nm LED
  • Multi-rate: 10-125 Mb/s, NRZ
  • Single +3.3 V power supply
  • RoHS compliant and lead-free
  • PECL differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor (SFF) 2x6 footprint
  • SC-RJ connector
  • TX optical output power squelch disabled
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Eye safety – designed to meet LED Class 1

  • Applications
  • Fast ethernet
  • FDDI
  • Multi-mode fibre links
  • Optical-electrical interface conversion

Compact SFP (CSFP) transceiver, SFP+, 2x Bi-Di, 1330 nm DML, 1270 nm PIN-TIA, 0 to 70°C

CP-A04EAEA-D

MPN:

CP-A04EAEA-D

Manufacturer L3 Communications

Coretek

Description:

The Compact Small Form Factor Pluggable (CSFP) optical transceiver CP-A04EAEA-D from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 10.3125 Gb/s. There are two single fibre duplex transmissions in a standard SFP+ form factor. The module is intended for single mode fibre, operates at a nominal wavelength of Tx: 1330 nm / Rx: 1270 nm and complies with Multi-Source Agreement (MSA) SFP+. It operates with +3.3 V power supply. Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed for use in 10 Gigabit Ethernet applications and to provide IEEE-802.3ae compliant link for 10.3 Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia specification GR-468-CORE.

Features:

  • Two bi-directional transceivers in one SFP+ package
  • CSFP MSA Option 2 compliant
  • 1330 nm uncooled DML
  • Receiver 1270 nm PIN-TIA
  • Data rate: 11.3 Gb/s, NRZ
  • Single +3.3 V power supply
  • RoHS compliant and lead-free
  • Compliant to SFP+ Mechanical MSA SFF-8432
  • Digital diagnostic
  • Duplex LC connector
  • Compliance with specifications for IEEE-802.3ae 10GBASE-LR/LW at 10.3125 Gb/s

  • Applications
  • 10G fibre channel links
  • 10Gigabit Ethernet links
  • 6.144 Gb/s, 3.072 Gb/s, 1.536 Gb/s, 0.768 Gb/s OBASI links
  • 9.830 Gb/s, 7.373 Gb/s, 6.144 Gb/s, 4.915 Gb/s, 2.458 Gb/s, 1.229 Gb/s, 0.614 Gb/s CPRI links

Compact SFP (CSFP) transceiver, SFP+, 2x Bi-Di, 1270 nm DML, 1330 nm PIN-TIA, 0 to 70°C

CP-A04AEAE-D

MPN:

CP-A04AEAE-D

Manufacturer L3 Communications

Coretek

Description:

The Compact Small Form Factor Pluggable (CSFP) optical transceiver CP-A04AEAE-D from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 10.3125 Gb/s. There are two single fibre duplex transmissions in a standard SFP+ form factor. The module is intended for single mode fibre, operates at a nominal wavelength of Tx: 1270 nm / Rx: 1330 nm and complies with Multi-Source Agreement (MSA) SFP+. It operates with +3.3 V power supply. Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed for use in 10 Gigabit Ethernet applications and to provide IEEE-802.3ae compliant link for 10.3 Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia specification GR-468-CORE.

Features:

  • Two bi-directional transceivers in one SFP+ package
  • CSFP MSA Option 2 compliant
  • 1270 nm uncooled DML
  • Receiver 1330 nm PIN-TIA
  • Data rate: 11.3 Gb/s, NRZ
  • Single +3.3 V power supply
  • RoHS compliant and lead-free
  • Compliant to SFP+ Mechanical MSA SFF-8432
  • Digital diagnostic
  • Duplex LC connector
  • Compliance with specifications for IEEE-802.3ae 10GBASE-LR/LW at 10.3125 Gb/s

  • Applications
  • 10G fibre channel links
  • 10Gigabit Ethernet links
  • 6.144 Gb/s, 3.072 Gb/s, 1.536 Gb/s, 0.768 Gb/s OBASI links
  • 9.830 Gb/s, 7.373 Gb/s, 6.144 Gb/s, 4.915 Gb/s, 2.458 Gb/s, 1.229 Gb/s, 0.614 Gb/s CPRI links

Compact SFP (CSFP) transceiver, SFP+, 2x Bi-Di, 1330 nm DML, 1270 nm PIN-TIA, -40 to 85°C

UK_CRT_CP-A04EAEA-E_PI_A.jpg

MPN:

CP-A04EAEA-E

Manufacturer L3 Communications

Coretek

Description:

The Compact Small Form Factor Pluggable (CSFP) optical transceiver CP-A04EAEA-E from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 10.3125 Gb/s. There are two single fibre duplex transmissions in a standard SFP+ form factor. The module is intended for single mode fibre, operates at a nominal wavelength of Tx: 1330 nm / Rx: 1270 nm and complies with Multi-Source Agreement (MSA) SFP+. It operates with +3.3 V power supply. Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed for use in 10 Gigabit Ethernet applications and to provide IEEE-802.3ae compliant link for 10.3 Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia specification GR-468-CORE.

Features:

  • Two bi-directional transceivers in one SFP+ package
  • CSFP MSA Option 2 compliant
  • 1330 nm uncooled DML
  • Receiver 1270 nm PIN-TIA
  • Data rate: 11.3 Gb/s, NRZ
  • Single +3.3 V power supply
  • RoHS compliant and lead-free
  • Compliant to SFP+ Mechanical MSA SFF-8432
  • Digital diagnostic
  • Duplex LC connector
  • Compliance with specifications for IEEE-802.3ae 10GBASE-LR/LW at 10.3125 Gb/s
  • Extended operating temperature from -40°C to 85°C

  • Applications
  • 10G fibre channel links
  • 10Gigabit Ethernet links
  • 6.144 Gb/s, 3.072 Gb/s, 1.536 Gb/s, 0.768 Gb/s OBASI links
  • 9.830 Gb/s, 7.373 Gb/s, 6.144 Gb/s, 4.915 Gb/s, 2.458 Gb/s, 1.229 Gb/s, 0.614 Gb/s CPRI links

Compact SFP (CSFP) transceiver, SFP+, 2x Bi-Di, 1270 nm DML, 1330 nm PIN-TIA, -40 to 85°C

CP-A04AEAE-E

MPN:

CP-A04AEAE-E

Manufacturer L3 Communications

Coretek

Description:

The Compact Small Form Factor Pluggable (CSFP) optical transceiver CP-A04AEAE-E from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 10.3125 Gb/s. There are two single fibre duplex transmissions in a standard SFP+ form factor. The module is intended for single mode fibre, operates at a nominal wavelength of Tx: 1270 nm / Rx: 1330 nm and complies with Multi-Source Agreement (MSA) SFP+. It operates with +3.3 V power supply. Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed for use in 10 Gigabit Ethernet applications and to provide IEEE-802.3ae compliant link for 10.3 Gb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia specification GR-468-CORE.

Features:

  • Two bi-directional transceivers in one SFP+ package
  • CSFP MSA Option 2 compliant
  • 1270 nm uncooled DML
  • Receiver 1330 nm PIN-TIA
  • Data rate: 11.3 Gb/s, NRZ
  • Single +3.3 V power supply
  • RoHS compliant and lead-free
  • Compliant to SFP+ Mechanical MSA SFF-8432
  • Digital diagnostic
  • Duplex LC connector
  • Compliance with specifications for IEEE-802.3ae 10GBASE-LR/LW at 10.3125 Gb/s
  • Extended operating temperature from -40°C to 85°C

  • Applications
  • 10G fibre channel links
  • 10Gigabit Ethernet links
  • 6.144 Gb/s, 3.072 Gb/s, 1.536 Gb/s, 0.768 Gb/s OBASI links
  • 9.830 Gb/s, 7.373 Gb/s, 6.144 Gb/s, 4.915 Gb/s, 2.458 Gb/s, 1.229 Gb/s, 0.614 Gb/s CPRI links

Transceiver, 4 x 25.78 Gb/s 850 nm multi-mode microQSFP SR4

Ligent LTU8531-BC

MPN:

LTU8531-BC+

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTU8531 is a microQSFP Optical transceiver for 4 x 25Gb/s optical links. It is compliant with the microQSFP MSA, IEEE P802.3bm 100GBASE-SR4 specifications. It operates at 25.78Gb/s up to 100m over OM4 Multi-mode fibre.

Features:

  • 4 independent parallel optical channels
  • Each channel data rate up to 25.78Gb/s with integrated CDR
  • Hot pluggable
  • Up to 100m link on OM4 Multi-mode fibre
  • 850nm VCSEL/PD array technology
  • CML compatible electrical I/O
  • microQSFP MSA compliance
  • Optical connectivity via industry standard MPO/MTP terminated fibre ribbon
  • Monitors for TX power, VCSEL bias, received power, module temperature and module supply
  • Case operating temperature: commercial: 0 to 70°C
  • RoHS II compliance

155Mb/s Fibre Optic Bi-Directional Transceiver, 1x9, SC/UPC Pigtail, 3.3V, 1550nm FP

Coretek CT-0155TBR-Cx9C 5751 155Mbps Single Mode Bi-Di Transceiver

MPN:

CT-0155TBR-L25P F

Manufacturer L3 Communications

Coretek

Description:

The CT-0155TBR-L25P F from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 155 Mb/s. It operates with +3.3 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1550 nm / Rx: 1310 nm and complies with the industry standard 1x9 footprint. Each module consists of a bi-directional optical subassembly that combines a transmitter with a receiver and an electrical subassembly. All of them are housed in a plastic package and the combination produces a reliable component.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1550 nm FP LD
  • Data Rate: 155 Mb/s, NRZ
  • Single +3.3 V Power Supply
  • Industry Standard 1×9 Output Footprint
  • Single SC/UPC Connectorised Pigtail
  • Compliance with 100Base-FX of IEEE802.3u Standard

155Mb/s Fibre Optic Bi-Directional Transceiver, 1x9, SC/UPC Pigtail, 3.3V, 1310nm FP

Coretek CT-0155TBR-Cx9C 5751 155Mbps Single Mode Bi-Di Transceiver

MPN:

CT-0155TBR-M25P F

Manufacturer L3 Communications

Coretek

Description:

The CT-0155TBR-M25P F from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 155 Mb/s. It operates with +3.3 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1310 nm / Rx: 1550 nm and complies with the industry standard 1x9 footprint. Each module consists of a bi-directional optical subassembly that combines a transmitter with a receiver and an electrical subassembly. All of them are housed in a plastic package and the combination produces a reliable component.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1310 nm FP LD
  • Data Rate: 155 Mb/s, NRZ
  • Single +3.3 V Power Supply PECL Differential Electrical Interface
  • Industry Standard 1×9 Output Footprint
  • Single SC/UPC Connectorised Pigtail
  • Compliance with 100Base-FX of IEEE802.3u Standard

Fibre Optic Transceiver, 10-125 Mbps, with bare fiber termination for 2.2mm POF, with LVDS I/O

Firecomms Fibre optic transceiver OPTOLOCK-Series

MPN:

EDL300T Serie

Manufacturer L3 Communications

Firecomms

Description:

The EDL300T serie delivers bandwidth of 100 Mbps over POF in a point-to-point link. It has a very simple interface to any Ethernet PHY IC supporting IEEE 802.3 100Base-FX.

Firecomms Ethernet transceiver combines both transmitter and receiver fiber optic components in a small form factor housing. OptoLock® allows bare fiber termination of standard jacketed Plastic Optic Fiber (POF) with a simple insert and lock system. It is an ideal solution for Fast Ethernet telecoms-installed IPTV and self-installed home networking.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: 10-250 MBd
  • Orientation: Horizontal
  • Colour: Black or white
  • Bare fiber termination for 2.2mm POF
  • LVDS I/O

Ethernet Transceiver, 10-125 Mbps, with bare fiber termination for 2.2mm POF, with LVPECL I/O

Firecomms Fibre optic transceiver OPTOLOCK-Series

MPN:

EDL301T Serie

Manufacturer L3 Communications

Firecomms

Description:

The EDL301T serie delivers bandwidth of 100 Mbps over POF in a point-to-point link. It has a very simple interface to any Ethernet PHY IC supporting IEEE 802.3 100Base-FX.

Firecomms Ethernet transceiver combines both transmitter and receiver fiber optic components in a small form factor housing. OptoLock® allows bare fiber termination of standard jacketed Plastic Optic Fiber (POF) with a simple insert and lock system. It is an ideal solution for Fast Ethernet telecoms-installed IPTV and self-installed home networking.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: 10-250 MBd
  • Orientation: Horizontal
  • Colour: Black or white
  • Bare fiber termination for 2.2mm POF
  • LVPECL I/O

Fibre Optic Transceiver, 10-250 Mbps, with bare fiber termination for 2.2mm POF, with LVDS I/O

Firecomms Fibre optic transceiver OPTOLOCK-Series

MPN:

IDL300T Serie

Manufacturer L3 Communications

Firecomms

Description:

The IDL300T serie delivers bandwidth of 100 Mbps over POF in a point-to-point link. It has a very simple interface to any Ethernet PHY IC supporting IEEE 802.3 100Base-FX.

Firecomms Ethernet transceiver combines both transmitter and receiver fiber optic components in a small form factor housing. OptoLock® allows bare fiber termination of standard jacketed Plastic Optic Fiber (POF) with a simple insert and lock system. It is an ideal solution for Fast Ethernet telecoms-installed IPTV and self-installed home networking.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: 10-250 MBd
  • Orientation: Horizontal
  • Colour: Black or white
  • Bare fiber termination for 2.2mm POF
  • LVDS I/O

LC Fiber Optic Transceiver, DC-10 MBd, LC termination for 2.2 mm POF, with TTL I/O, dual voltage 3.3V and 5V

Firecomms Fiber optic LC-Transceiver-Series

MPN:

FE50MLIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FE50MLIR DC-50 MBd LC transceiver consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with integrated driver IC as a visible optical transmitter and a receiver with a fully integrated photodiode and receiver IC. The transmitter and receiver are housed in Firecomms industrial LC connector, compliant with IEC 61754-20. hey are capable of delivering 50 MBd digital signals over fiber and operate in the temperature range of -40°C to +85°C. The device can operate from 5 V or 3.3 V DC power supply rails and can tolerate +/-10 % supply variation.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 50 MBd
  • Orientation: Horizontal
  • Colour: Black
  • LC termination for 2.2 mm POF
  • TTL I/O
  • Dual voltage operation 3.3V and 5V

Fibre Optic Transceiver, 10-250 Mbps, with bare fiber termination for 2.2mm POF, with LVDS I/O

Firecomms Fibre optic transceiver OPTOLOCK-Series

MPN:

FB2M5KVR

Manufacturer L3 Communications

Firecomms

Description:

Firecomms' FB2M5KVR OptoLock® transceiver carries a pair of Fast Ethernet Fiber Optic Transceivers (FOTs) designed to provide Ethernet data links over POF in industrial environments. The FOTs are compatible with LVPECL which is the standard bus for a Fast Ethernet physical layer interface IC supporting the IEEE 100Base-FX standard.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: 10 to 125 MBd
  • Orientation: Horizontal
  • Colour: Black
  • Bare fiber termination for 2.2mm POF
  • LVDS I/O

Ethernet Fiber Optic LC Transceiver, 10-125 Mbps, LC fiber termination for 2.2mm POF, with LVPECL I/O

Firecomms Fiber optic LC-Transceiver-Series

MPN:

FB1M2LPR

Manufacturer L3 Communications

Firecomms

Description:

Firecomms' FB1M2LPR duplex LC connector for Fast Ethernet combines both transmitter and receiver fiber optic components in a small form factor LC housing. The LC connector allows termination of LC cable plugs with both standard 2.2 mm jacketed Plastic Optical Fiber (POF) and Plastic Clad Silica (PCS) multimode glass fibers used for extended distance applications.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: 10 to 125 MBd
  • Orientation: Horizontal
  • Colour: Black
  • LC fiber termination for 2.2mm POF
  • LVPECL I/O

Ethernet Fiber Optic LC Transceiver, 10-125 Mbps, LC fiber termination for 2.2mm POF, with LVDS I/O

Firecomms Fiber optic LC-Transceiver-Series

MPN:

FB2M5LVR

Manufacturer L3 Communications

Firecomms

Description:

Firecomms' FB2M5LVR industrial LC connector has a small form factor housing, compliant with IEC 61754-20, which includes a pair of transceiver components to provide instant termination for Plastic Optical Fiber (POF) terminated in LC plug assemblies. The LC system offers compact termination ideal for rack mounted applications.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: 10 to 125 MBd
  • Orientation: Horizontal
  • Colour: Black
  • LC fiber termination for 2.2mm POF
  • LVDS I/O

Fibre Optic Transmitter, DC-1 MBd, Vertical or Horziontal, 650nm RCLED, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Grey

MPN:

FT01MHNR/FT01MVNR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT01MHNR and FT01MVNR DC to 1 MBd RedLink® transmitter is based on the highly reliable Firecomms designed Resonant Cavity Light Emitting Diode (RCLED) technology. It is housed in a non-conducting plastic RedLink connector. The 1 MBd transmitter is gray in colour. The housings are compatible with the Versatile Link style fiber plug and are optimized for use with Plastic Optic Fiber (POF) and Polymer Clad Silica (PCS).

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 1 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Grey
  • For Versatile link plugs
  • 650nm RCLED

Fibre Optic Receiver, DC-1 MBd, Vertical or Horziontal, for Versatile link plugs, with TTL I/O

Firecomms Fibre optic transceiver Redlink-Blue

MPN:

FM01MHIR/FM01MVIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FM01MHIR and FM01MVIR DC to 1 MBd High Temperature RedLink® receiver uses integrated light detection and amplification in a single piece of silicon giving enhanced immunity to EMI/EMC from the local environment making the unit ideal for use in electrically noisy applications. It operates over an extended industrial temperature range of -40°C to +95°C supporting many industrial applications where reliable command and control response is required in electrically harsh environments.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 1 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Blue
  • For Versatile link plugs
  • TTL I/O

Fibre Optic Transmitter, DC-1 MBd, Vertical or Horziontal, 530nm Green LED, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Green

MPN:

FT01MHNG/FT01MVNG

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT01MHNG and FT01MVNG DC to 1 MBd green 530 nm transmitter is designed for maximum distance at low speed communication in Plastic Optic Fiber (POF). It is housed in a non-conducting plastic RedLink® connector. The housings are compatible with the Versatile Link style fiber plug and are optimized for use with both POF and Polymer Clad Silica (PCS). The transmitter can be driven from TTL type logic drivers. It operates over the industrial temperature range of -40°C to +85°C, supporting many industrial applications where reliable command and control response is required in electrically harsh environments.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 1 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Green
  • For Versatile link plugs
  • 530nm Green LED

Fibre Optic Transmitter, DC-5 MBd, Vertical or Horziontal, 650nm RCLED, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Grey

MPN:

FT05MHNR/FT05MVNR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT05MHNR/FT05MVNR DC to 5 MBd RedLink® transmitter is based on the highly reliable Firecomms designed Resonant Cavity Light Emitting Diode (RCLED) technology. It is housed in a non-conducting plastic RedLink® connector. The 5 MBd transmitter is grey in colour. The housings are compatible with the Versatile Link style fiber plug and are optimized for use with Plastic Optic Fiber (POF) and Plastic Clad Silica (PCS) fiber.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 5 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Grey
  • For Versatile link plugs
  • 650nm RCLED

Fibre Optic Receiver, DC-5 MBd, Vertical or Horziontal, for Versatile link plugs, with TTL I/O, dual voltage 3.3V and 5V

Firecomms Fibre optic transceiver Redlink-Blue

MPN:

FM05DHIR/FM05DVIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms FM05DHIR and FM05DVIR DC to 5 MBd Dual supply voltage RedLink® receiver is based on a fully integrated photo-diode with TIA and limiting amplifier. Housed in non-conducting plastic RedLink® connector housings, the receiver is blue in colour. The housing is compatible with the Versatile Link style fiber plug, and is designed primarily for use with Plastic Optic Fiber (POF).

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 5 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Blue
  • For Versatile link plugs
  • TTL I/O
  • Dual voltage operation 3.3V and 5V

Fibre Optic Receiver, DC-5 MBd, Vertcial or Horziontal, for Versatile link plugs, TTL I/O

Firecomms Fibre optic transceiver Redlink-Blue

MPN:

FM05MHIR/FM05MVIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms FM05MHIR and FM05MVIR DC to 5 MBd Dual supply voltage RedLink® receiver is based on a fully integrated photo-diode with TIA and limiting amplifier. Housed in non-conducting plastic RedLink® connector housings, the receiver is blue in colour. The housing is compatible with the Versatile Link style fiber plug, and is designed primarily for use with Plastic Optic Fiber (POF).

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 5 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Blue
  • For Versatile link plugs
  • TTL I/O

Fibre Optic Receiver, DC-2 MBd, Vertical or Horziontal, 20V Open Collector Output, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Blue

MPN:

FM20VHIR/FM20VVIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FM20VHIR and FM20VVIR RedLink® receiver is based on a fully integrated photodiode with TIA, limiting amplifier and a MOSFET open source output to handle switching of voltages in the range from 3 to 20 V (e.g. 3.3, 5, 12, 15 V). Housed in non-conducting plastic the RedLink® receiver connector is blue. he receiver operates over the industrial temperature range of -40°C to +85°C supporting many industrial applications where reliable command and control response is required in electrically harsh environments.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 2 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Blue
  • For Versatile link plugs
  • 20V Open Collector Output

Fibre Optic Transmitter, DC-10 MBd, Vertical or Horziontal, 650nm RCLED, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Grey

MPN:

FT10MHNR/FT10MVNR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT10MHNR/FT10MVNR DC to 10 MBd RedLink® transmitter is based on the highly reliable Firecomms designed Resonant Cavity Light Emitting Diode (RCLED) technology. The transmitter can be driven from TTL type logic drivers. It operates over the industrial temperature range of -40°C to +85°C, supporting many industrial applications where reliable command and control response is required in electrically harsh environments.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 10 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Grey
  • For Versatile link plugs
  • 650nm RCLED

Fibre Optic Transmitter, DC-10 MBd, Vertical or Horziontal, Low current 650nm RCLED, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Grey

MPN:

FT10MHLR/FT10MVLR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT10MHLR/FT10MVLR DC to 10 MBd low current RedLink® transmitter is a highly reliable Resonant Cavity Light Emitting Diode (RCLED) which operates as a visible optical source generating red 650 nm light at data rates from burst mode DC to a maximum of 10 MBd of continuous digital data. The RCLED is encapsulated in a lensed clear molded plastic package for optimum coupling to Plastic Optic Fiber (POF). It operates over the industrial temperature range of -40°C to +85°C.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 10 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Grey
  • For Versatile link plugs
  • Low current 650nm RCLED

Fibre Optic Transmitter, DC-10 MBd, Vertical or Horziontal, 650nm RCLED, with integrated driver, inverting logic, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Grey

MPN:

FT10DHIR/FT10DVIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT10DHIR/FT10DVIR DC-10 MBd RedLink® transmitter consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with integrated driver IC as a visible optical transmitter. The device is housed in a miniature package to interface to plug-terminated lengths of Plastic Optic Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fiber. It is capable of delivering 10 MBd digital signals over fiber and operate in the temperature range of -40°C to +85°C. The device can operate from a 5 V or 3.3 V DC power rail and can tolerate ± 10 % supply variation.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 10 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Black
  • For Versatile link plugs
  • Inverting logic
  • Dual voltage operation 3.3V and 5V

Fibre Optic Transmitter, DC-10 MBd, Vertical or Horziontal, 650nm RCLED, with integrated driver, non-inverting logic, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Grey

MPN:

FT10DHNR/FT10DVNR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT10DHNR/FT10DVNR DC-10 MBd RedLink® transmitter consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with integrated driver IC as a visible optical transmitter. The device is housed in a miniature package to interface to plug-terminated lengths of Plastic Optic Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fiber. It is capable of delivering 10 MBd digital signals over fiber and operate in the temperature range of -40°C to +85°C. The device can operate from a 5 V or 3.3 V DC power rail and can tolerate ± 10 % supply variation.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 10 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Grey
  • For Versatile link plugs
  • Non-inverting logic
  • 650nm RCLED
  • With integrated driver

Fibre Optic Receiver, DC-10 MBd, Vertical or Horziontal Horziontal, inverting logic, dual voltage 3.3V and 5V for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Black

MPN:

FM10DHIR/FM10DVIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FM10DHIR/FM10DVIR DC-10 MBd RedLink® receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package to interface to plug-terminated lengths of Plastic Optic Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fiber. When paired with the appropriate transmitter, the receiver is capable of delivering 10 MBd digital signals over fiber and operate in the temperature range of -40°C to +85°C. The device can operate from 5 V or 3.3 V DC power rails and can tolerate +/-10 % supply variation.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 10 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Black
  • For Versatile link plugs
  • Inverting logic
  • Dual voltage operation 3.3V and 5V

Fibre Optic Receiver, DC-10 MBd, Vertical or Horziontal, non-inverting logic, dual voltage 3.3V and 5V for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Black

MPN:

FM10DHNR/FM10DVNR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FM10DHNR/FM10DVNR DC-10 MBd RedLink® receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package to interface to plug-terminated lengths of Plastic Optic Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fiber. When paired with the appropriate transmitter, the receiver is capable of delivering 10 MBd digital signals over fiber and operate in the temperature range of -40°C to +85°C. The device can operate from 5 V or 3.3 V DC power rails and can tolerate +/-10 % supply variation.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 10 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Black
  • For Versatile link plugs
  • Non-Inverting logic
  • Dual voltage operation 3.3V and 5V

Fibre Optic Transmitter, DC-50 MBd, Vertical or Horziontal, 650nm RCLED, integrated driver, inverting logic, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Grey

MPN:

FT50MHNR/FT50MVNR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT50MHNR/FT50MVNR DC-50 MBd RedLink transmitter consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with integrated driver IC as a visible optical transmitter. The device is housed in a miniature package to interface to plug-terminated lengths of Plastic Optic Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fiber.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 50 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Grey
  • For Versatile link plugs
  • Inverting logic
  • Integrated driver
  • 650nm RCLED

Fibre Optic Transmitter, DC-50 MBd, Vertical or Horziontal, 650nm RCLED, integrated driver, non-inverting logic, for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Grey

MPN:

FT50MHIR/FT50MVIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FT50MHIR/FT50MVIR DC-50 MBd RedLink transmitter consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with integrated driver IC as a visible optical transmitter. The device is housed in a miniature package to interface to plug-terminated lengths of Plastic Optic Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fiber.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 50 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Grey
  • For Versatile link plugs
  • Non-Inverting logic
  • Integrated driver
  • 650nm RCLED

Fibre Optic Receiver, DC-50 MBd, Vertical or Horziontal, inverting logic, dual voltage 3.3V and 5V for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Black

MPN:

FM50MHIR/FM50MVIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FM50MHIR/FM50MVIR DC-50 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package to interface to plug-terminated lengths of Plastic Optic Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fiber. When paired with the appropriate transmitter, the receiver is capable of delivering 50 Mbps digital signals over fiber and operate in the temperature range of -40°C to +85°C. The device can operate from 5 V or 3.3 V DC power rails and can tolerate +/-10 % supply variation.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 50 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Black
  • For Versatile link plugs
  • Inverting logic
  • Integrated driver
  • Dual voltage operation 3.3V and 5V

Fibre Optic Receiver, DC-50 MBd, Vertical or Horziontal, non-inverting logic, dual voltage 3.3V and 5V for Versatile link plugs

Firecomms Fibre optic transceiver Redlink-Black

MPN:

FM50MHNR/FM50MVNR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FM50MHNR/FM50MVNR DC-50 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package to interface to plug-terminated lengths of Plastic Optic Fiber (POF) or 200 µm Plastic Clad Silica (PCS) fiber. When paired with the appropriate transmitter, the receiver is capable of delivering 50 Mbps digital signals over fiber and operate in the temperature range of -40°C to +85°C. The device can operate from 5 V or 3.3 V DC power rails and can tolerate +/-10 % supply variation.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: DC to 50 MBd
  • Orientation: Horizontal or Vertical
  • Colour: Black
  • For Versatile link plugs
  • Non-Inverting logic
  • Integrated driver
  • Dual voltage operation 3.3V and 5V

Analogue Fibre Optic Receiver, Vertical or Horziontal, 500µm Photodiode

Firecomms Fibre optic transceiver Redlink-Blue

MPN:

FR00AHAR/FR00AVAR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FR00AHAR andFR00AVAR Analogue Receiver is based on a highly reliable photodiode which generates a current proportional to the fiber coupled incident light. It is encapsulated in a clear plastic over-mold which forms a lens suitable for coupling to 1mm Plastic Optic Fiber(POF). The receiver is housed in a blue plastic housing which is UL rated flame retardant (UL 94 V-0).

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Analogue receiver
  • Orientation: Horizontal or Vertical
  • Colour: Blue
  • 500 µm Photodiode
  • Industrial temperature range -40°C to +85°C 

Analogue Fibre Optic Transceiver, 650nm RCLED, 500µm Photodiode with bare fiber termination for 2.2mm POF

Firecomms Fibre optic transceiver OPTOLOCK-Series

MPN:

FB00AKAR

Manufacturer L3 Communications

Firecomms

Description:

Firecomms' FB00AKAR analogue OptoLock® transceiver is a duplex connector with a transmitter that uses a high-speed RCLED and a separate receiver channel which has a high bandwidth low capacitance photodiode. The receiver is a low capacitance high-speed photo-diode which facilitates receiving light signals from DC up to 125 MHz. Both the TX and RX are separately.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Fibercomms

Features:

  • Data rate: Analogue DC to 125 MBd
  • Orientation: Horizontal
  • Colour: Black
  • 650nm RCLED
  • 500 µm Photodiode with bare fiber termination for 2.2mm POF

50MBd Fibre Optic Transceiver, with bare fiber termination for 2.2mm POF, with TTL I/O, dual voltage 3.3V and 5V

Firecomms Fibre optic transceiver OPTOLOCK-Series

MPN:

FE50MKIR

Manufacturer L3 Communications

Firecomms

Description:

The Firecomms' FE50MKIR DC-50 MBd OptoLock® transceiver consists of a highly reliable Resonant Cavity Light Emitting Diode (RCLED) with integrated driver IC as a visible optical transmitter and a receiver with a fully integrated photodiode and receiver IC.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Fibercomms

Features:

  • Data rate: DC to 50 MBd
  • Orientation: Horizontal
  • Colour: Black
  • Bare fiber termination for 2.2mm POF
  • TTL I/O
  • Dual voltage operation 3.3V and 5V

Ethernet Fibre Optic Transceiver, 10-125 Mbps, with bare fiber termination for 2.2mm POF, with LVPECL I/O

Firecomms Fibre optic transceiver OPTOLOCK-Series

MPN:

FB1M2KPR

Manufacturer L3 Communications

Firecomms

Description:

Firecomms' FB1M2KPR OptoLock® transceiver carries a pair of Fast Ethernet Fiber Optic Transceivers (FOTs) designed to provide Ethernet data links over POF in industrial environments. The FOTs are compatible with LVPECL which is the standard bus for a Fast Ethernet physical layer interface IC supporting the IEEE 100Base-FX standard.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of Fiber optics components

See all products from our supplier Firecomms

Features:

  • Data rate: 10 to 125 MBd
  • Orientation: Horizontal
  • Colour: Black
  • LVPECL I/O
  • Bare fiber termination for 2.2mm POF

DC to 0.5Mb/s Single Mode Transceiver, 5V, 1x9, 1310nm FP LD, Duplex SC Connector

Coretek CT-000ATTR-M15C-WT 1310nm Single mode Transceiver

MPN:

CT-000ATTR-M15C WT

Manufacturer L3 Communications

Coretek

Description:

The CT-000ATTR-M15C WT from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 0.5 Mb/s. It operates with a +5 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of 1310 nm and complies with the industry standard 1x9 footprint. The module is a dual fiber connector transceiver designed for use in PDH (Plesiochronous Digital Heirarchy) data transmission for 0.5 Mb/s long reach application. The characterization is performed in accordance with Telcordia Specification GR-468-CORE.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1310 nm FP LD
  • Data Rate: DC to 0.5 Mb/s
  • Single +5 V Power Supply
  • RoHS Compliant and Lead-free
  • TTL Electrical Data Interface
  • Industry Standard 1x9 Output Footprint
  • Duplex SC Connector
  • Eye Safety: Designed to meet Laser Class 1 comply with EN60825-1

DC to 0.5Mb/s SFP Single Mode Transceiver, 5V, 1310nm FP LD, Duplex LC Connector

Coretek CT-000ATSP-M15L SFP 1310nm Single mode Transceiver

MPN:

CT-000ATSP-M15L

Manufacturer L3 Communications

Coretek

Description:

The CT-000ATSP-M15L from Coretek Opto Corp. is cost-effective module for serial optical data communication applications specified for data-rates of 0.5 Mb/s. It operates with a +5 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of 1310 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP).

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1310 nm FP LD
  • Data Rate: DC to 0.5 Mb/s
  • Single +5 V Power Supply
  • RoHS Compliant and Lead-free
  • TTL Electrical Data Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Duplex LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Single mode Optical Video Transceiver, 1550nm DFB LD, Single LC Connector

Coretek CT-2500VBP Series Video optical transceiver

MPN:

CT-2500VBP-KB5L-D

Manufacturer L3 Communications

Coretek

Description:

The CT-2500VBP-KB5L-D from Coretek Opto Corp. is a high performance and cost-effective module for serial optical data communication applications specified for multi-rate from 50 Mb/s to 3 Gb/s. It operates with a +3.3 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1550 nm / Rx: 1310 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module has integrated digital diagnostics functions via an I2C serial interface.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1550 nm DFB LD
  • Multi-rate: from 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Single LC Connector
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Single mode Optical Video Transceiver, 1310nm DFB LD, Single LC Connector

Coretek CT-2500VBP Series Video optical transceiver

MPN:

CT-2500VBP-NB5L-D

Manufacturer L3 Communications

Coretek

Description:

The CT-2500VBP-NB5L-D from Coretek Opto Corp. is a high performance and cost-effective module for serial optical data communication applications specified for multi-rate from 50 Mb/s to 3 Gb/s. It operates with a +3.3 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1310 nm / Rx: 1550 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module has integrated digital diagnostics functions via an I2C serial interface.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1310 nm DFB LD
  • Multi-rate: from 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Single LC Connector
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Single mode Optical Video Transceiver, 1550nm DFB LD, Single LC Connector, Non-MSA pinning

Coretek CT-2500VBP Series Video optical transceiver

MPN:

CT-2500VBP-KN5L-D

Manufacturer L3 Communications

Coretek

Description:

The CT-2500VBP-KN5L-D from Coretek Opto Corp. is a high performance and cost-effective module for serial optical data communication applications specified for multi-rate from 50 Mb/s to 3 Gb/s. It operates with a +3.3 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1550 nm / Rx: 1310 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module has integrated digital diagnostics functions via an I2C serial interface.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1550 nm DFB LD
  • Multi-rate: from 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Single LC Connector
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Single mode Optical Video Transceiver, 1310nm DFB LD, Single LC Connector, Non-MSA pinning

Coretek CT-2500VBP Series Video optical transceiver

MPN:

CT-2500VBP-NN5L-D

Manufacturer L3 Communications

Coretek

Description:

The CT-2500VBP-NN5L-D from Coretek Opto Corp. is a high performance and cost-effective module for serial optical data communication applications specified for multi-rate from 50 Mb/s to 3 Gb/s. It operates with a +3.3 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of Tx: 1310 nm / Rx: 1550 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module has integrated digital diagnostics functions via an I2C serial interface.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1310 nm DFB LD
  • Multi-rate: from 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Single LC Connector
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

10Gb/s Tunable DWDM SFP+ 80km Transceiver

Acal BFi ABXP-DWT96-80D SFP+ Transceiver

MPN:

ABXP-DWT96-80D

Manufacturer L3 Communications

Acal BFi - Fibre optics

Description:

The ABXP-DWT96-80D 10 Gb/s SFP+ tunable transceiver is an integrated fiber optic transceiver that provides a high-speed serial link at signaling rates from 9.95 Gb/s to 11.3 Gb/s. The transceiver integrates the receiver and transmitter path on one module. The transceiver contain a C-band-tunable integrated Mach-Zehnder (MZ) laser, enabling data transmission over single-mode fiber through an industry-standard LC connector.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Acal BFi

Features:

  • Supports 9.95Gb/s to 11.3Gb/s bit rates
  • Monolithically integrated full C-band tunable transmitter and APD receiver
  • 50 GHz ITU channel spacing with integrated wavelength locker
  • Maximum link length of 80km
  • Metal enclosure for lower EMI

SFP28 Optical Transceiver for 28 Gb/s, 850nm, 100m

LIGENT LTF8508 SFP28 Optical transceiver

MPN:

LTF8508-BC

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTF8508 SFP+ transceiver is designed for using in fibre channel links up to 28.05 Gbps data rate over multimode fibre. It consumes low power, operates from a 3.3V DC power supply and is offered in the commercial temperature range. It is compliant with FC-PI-6, SFF-8431 and SFF-8432. The low jitter and low bit error rate optical assembly features a 850nm VCSEL laser transmitter and PIN/TIA receiver. It incorporates the SFP+ MSA LVTTL Loss of Signal (Rx_LOS), Tx Fault (Tx_FAULT), MOD_ABS and Tx Disable (Tx_DIS) monitor and control functions . The differential AC coupled Tx and Rx data interfaces are CML compatible. The device is Class I laser safety compliant.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • LC Duplex optical interface
  • Reach: max up to 100m on OM4 MMF
  • Bit rate:28.05Gb/s
  • +3.3 V power supply
  • Low DC power consumption
  • 2x10 SFP+ MSA compliant package
  • Hot swappable
  • High performance 850 nm VCSEL laser
  • High sensitivity PIN/TIA optical receiver
  • Multimode operation

40G BASE-LR4 QSFP+ Ethernet Single Mode Transceiver Module

Coretek CT-D000TQP-CB2L-D Optical Transceiver

MPN:

CT-D000TQP-CB2L-D

Manufacturer L3 Communications

Coretek

Description:

The CT-D000TQP-CB2L-D from Coretek Opto Corp. is a high performance, optimum heat dissipation and excellent electromagnetic shielding module for serial optical data communication applications specified for single mode of data rate 41.2 Gb/s. The module is intended for single mode fiber, operates at a nominal wavelength of CWDM and complies with Multi-Source Agreement (MSA) QSFP+. Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide 40 Gigabit Ethernet compliant link at 41.2 Gb/s intermediate reach applications. The characteristics are performed in accordance with IEEE802.3ba.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 4x10Gbps uncooled CWDM O-band LD
  • Data Rate: 41.2Gbps, NRZ
  • Compliant to QSFP+ MSA SFF-8436
  • 40GBASE-LR4 Lite at 41.2 Gbps
  • Digital Diagnostic Monitoring Interface
  • Duplex LC Connector
  • Low power consumption < 3.5W

1550nm Butterfly DFB Laser, up to 10mW, 10GHz, for Broadband analog signals

AGX ALMxK series DFB Laser

MPN:

ALM5K

Manufacturer L3 Communications

AGx

Description:

The ALM5K series of 1550nm DFB laser modules are intended for use in the transmission of broadband analog signals. Their high linearity makes them especially suitable for RF over fiber applications. All critical components, including optical isolator, TEC, thermistor, laser, and monitor photodiode are hermetically sealed in a butterfly package.

View our wide range of Fibre optic transmitters

View our portfolio of Fiber optics components

See all products from our supplier AGx Technologies

Features:

  • Bandwidth: 6 or 10 GHz
  • Directly Modulated 1550 nm DFB Lasers
  • K Connector RF port
  • Internal thermoelectric cooler, monitor photodiode
  • Minimum 8 dBm Optical Output Power
  • Fibre optic Type: SMF28e fiber, flame retardant Hytrel coating, 0.9 mm diameter
  • Length: 1-meter minimum
  • Nominal Pin Lead Length: 5mm (from external package wall)
  • SC/APC connector standard

1310nm Butterfly DFB Laser, up to 10mW, 10GHz, for Broadband analog signals

AGX ALMxK series DFB Laser

MPN:

ALM3K

Manufacturer L3 Communications

AGx

Description:

The ALM3K series of 1310nm DFB laser modules are intended for use in the transmission of broadband analog signals. Their high linearity makes them especially suitable for RF over fiber applications. All critical components, including optical isolator, TEC, thermistor, laser, and monitor photodiode are hermetically sealed in a butterfly package.

View our wide range of Fibre optic transmitters

View our portfolio of Fiber optics components

See all products from our supplier AGx Technologies

Features:

  • Bandwidth: 6 or 10 GHz
  • Directly Modulated 1310 nm DFB Lasers
  • K Connector RF port
  • Internal thermoelectric cooler, monitor photodiode
  • Minimum 8 dBm Optical Output Power
  • Fibre optic Type: SMF28e fiber, flame retardant Hytrel coating, 0.9 mm diameter
  • Length: 1-meter minimum
  • Nominal Pin Lead Length: 5mm (from external package wall)
  • SC/APC connector standard

SFP transceiver for IEEE C37.94 teleprotection, 2Mb/s, multi mode, 2km

CT-0155NSP-SB2L-E_2M

MPN:

CT-0155NSP-SB2L-E 2M

Manufacturer L3 Communications

Coretek

Description:

The CT-0155NSP-SB2L-E 2M from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for 2 Mb/s. It operates with a +3.3 V power supply. The module is intended for multi-mode fiber, operates at a nominal wavelength of 850 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide an IEEE C37.94 compliant link for 2 Mb/s short reach applications. The characterization is performed in accordance to Telcordia Specification GR-468-CORE.

Features:

  • 850 nm VCSEL
  • Data Rate: 2 Mb/s, NRZ
  • Distance: 2 km
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic
  • Monitoring Interface
  • Duplex LC Connector
  • Compatible with IEEE C37.94 / IEC 62843
  • Standard

SFP transceiver for IEEE C37.94 teleprotection, 2Mb/s, single mode, 20km

CT-0155TSP-MB5L-E_2M

MPN:

CT-0155TSP-MB5L-E 2M

Manufacturer L3 Communications

Coretek

Description:

The CT-0155TSP-MB5L-E 2M from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for 2 Mb/s. It operates with +3.3 V power supply. The module is intended for single mode fiber, operates at a nominal wavelength of 1310 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module is integrated digital diagnostics functions via an I2C serial interface.

The module is a duplex LC connector transceiver designed to provide an IEEE C37.94 / IEC 62843 link for 2 Mb/s intermediate reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.

Features:

  • 1310 nm FP LD
  • Data Rate: 2 Mb/s, NRZ
  • Distance: 20 km
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic
  • Monitoring Interface
  • Duplex LC Connector
  • Compatible with IEEE C37.94 / IEC 62843
  • Standard

Wavelength Conversion Laser Opti λ 559

WS-0559-020-A-A-A

MPN:

WS-0559-020-A-A-A

Manufacturer L3 Communications

NEL Photonics Business Group

Description:

The Opti-Lambda light sources provide near Gaussian beam mode quality 559 nm or 589 nm yellow light with ultra-low noise together with high speed direct intensity modulation and low power consumption. This is achieved by empolying two telecom grade DFB lasers and sum frequency generation (SFG) in a periodically poled lithium niobate (PPLN) crystal. Other wavelengths are available upon request. Laser drivers are available.

View our wide range of Fibre optic light sources and wavelength converters

View our portfolio of Fibre optics

See all products from our supplier NEL Photonics Business Group

Features:

  • TEM00 spatial mode
  • High-beam quliaty near Gaussian beam: M² ~1.2
  • High-speed direct modulation up to 2 MHz
  • Low noise (<1%rms)
  • High beam quality
  • Low power consumption

Wavelength Conversion Module for 1064nm Light generation

NEL Photonics Business Group WS Wavelength Conversion Module for 578nm Light Generation

MPN:

WH-1064-000-F-B-C

Manufacturer L3 Communications

NEL Photonics Business Group

Description:

The WH-1064-000-F-B-C model is a wavelength conversion module for 1064 nm light generation based on quasi-phase matched Lithium-Niobate (LN) waveguide modules second harmonic generation (SHG). The module is fiber coupled and consists of a PPLN waveguide, a thermoelectric cooler and a thermistor. The SHG module can e.g. be used to measure the carrier–envelope offset frequency in octave spanning frequency combs around 1550 nm by means of the f-2f approach in which light at the long wavelength side of the spectrum is frequency doubled and a heterodyne beat is generated with light at the same wavelength from the original spectrum. This beat frequency can be detected with a photodiode.

View our wide range of Fibre optic light sources and wavelength converters

View our portfolio of Fibre optics

See all products from our supplier NEL Photonics Business Group

Features:

  • Pump Wavelength: 2128 nm
  • SHG Wavelength: 1064 nm
  • Linewidth (FWHM): 100 MHz
  • Max Rating of Input Power: 200 mW
  • Module dimensions: 50 x 30 x 11.2mm

QSFP+ Optical Transceiver, 40 Gb/s, 850nm Transceiver with DDM

LIGENT LTA85XX Optical Transceiver

MPN:

LTA8511

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTA8511 is a QSFP+ Optical transceiver for 4 x 10Gb/s optical links. It is compliant with the QSFP+ MSA, IEEE802.3ba 40GBASE- SR4 specifications. It operates at 10.3125Gb/s up to 100m over OM3 multimode optical fibre and 150m over OM4 fibre.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Each channel data rate up to 10.3125Gb/s
  • Hot Pluggable
  • Up to 100m link on OM3 Multi-mode Fiber
  • 850nm VCSEL/PD Array Technology
  • CML Compatible electrical I/O
  • Low power consumption of 1.0W
  • QSFP+ MSA Compliance
  • Optical connectivity via industry standard MPO/MTP terminated fiber ribbon
  • Diagnostic monitors for VCSEL bias, received power,module tem-perature, and module supply
  • Case Operating Temperature: Commercial: 0 to 70°C
  • RoHS II Compliance

QSFP+ Optical Transceiver, 40 Gb/s, up to 300m, 850nm Transceiver with DDM

LIGENT LTA85XX Optical Transceiver

MPN:

LTA8512

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTA8512 is a QSFP+ Optical transceiver for 40GBASE-SR4 Ethernet and 4x10G Infini-Band applications,and which also supports optical interoperability with IEEE 10GBASE-SR compliant products. This transceiver is compliant with SFF-8436 QSFP+ MSA, IEEE802.3ba 40GBASE- SR4 specifications. It operates at 10.3125Gb/s up to 300m over OM3 multimode opti-cal fibre.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Each channel data rate up to 10.3125Gb/s
  • Hot Pluggable QSFP+ form factor
  • Up to 300m link on OM3 MMF
  • 850nm VCSEL/PD Array Technology
  • CML Compatible electri-cal I/O
  • Maximum power consumption <1.5W
  • QSFP+ MSA Compliance
  • Optical connectivity via industry standard MPO/MTP terminated fiber ribbon
  • Diagnostic monitors for VCSEL bias, received power, module tem-perature, and module supply
  • Case Operating Temperature: Commercial: 0 to 70°C
  • RoHS II Compliance

QSFP+ Optical Transceiver, 4 x 10.3125Gb/s, up to 100m, 850nm Transceiver with DDM

LIGENT LTA85XX Optical Transceiver

MPN:

LTA8513

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTA8513 is a QSFP+ Optical transceiver for 40GBASE-SR4 Ethernet and 4x10G InfiniBand appli-cations,and which also supports optical interoperability with IEEE 10GBASE-SR compliant products. This transceiver is compliant with SFF-8436 QSFP+ MSA, IEEE802.3ba 40GBASE- SR4 specifications. It operates at 10.3125Gb/s up to 100m over OM3 multimode optical fibre and 150m over OM4 fibre.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Each channel data rate up to 10.3125Gb/s
  • Hot Pluggable QSFP+ form factor
  • Up to 100m link on OM3 MMF and 150m on OM4 MMF
  • 850nm VCSEL/PD Array Technology
  • CML Compatible electrical I/O
  • Maximum power consumption <1.5W
  • QSFP+ MSA Compliance
  • Case Operating Temperature: Commercial: 0 to 70°C
  • RoHS II Compliance

QSFP+ Optical Transceiver, 4 x 3.125Gb/s, 850nm Transceiver with DDM

LIGENT LTA8514 Optical Transceiver

MPN:

LTA8514

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTA8514 is a QSFP+ Optical transceiver for 4 x 3.125Gb/s optical links. It is compliant with the QSFP+ MSA.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Each channel data rate up to 3.125Gb/s
  • Hot Pluggable QSFP+ form factor
  • Up to 200m link on OM2 MMF
  • 850nm VCSEL/PD Array Technology
  • CML Compatible electrical I/O
  • Maximum power consumption <1.5W
  • Case Operating Temperature: Commercial: 0 to 70°C
  • RoHS II Compliance

QSFP+ Active Optical Cable, 40Gb/s optical links, up to 100m

LIGENT DQF85XX-AOC Optical Transceiver

MPN:

DQF8501

Manufacturer L3 Communications

Hisense Broadband

Description:

The DQF8501 is a QSFP+ active optical cable (AOC) for 40Gb/s optical links. It is compliant with the QSFP+ MSA, IEEE802.3ba 40GBASE- SR4 specifications. It operates at 10.3125Gb/s and the cable length is up to 100m.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Channel data rate up to 10.3125Gb/s
  • Hot Pluggable
  • Up to 100m link over Multi-mode Fiber
  • CML Compatible electrical I/O
  • Low power consumption of 1.0 W
  • QSFP+ MSA Compliance
  • Case Operating Temperature Range: Commercial: 0 to 70°C
  • RoHS compliance

XFP DWDM Duplex Optical Transceiver, C-Band, 9.95 to 11.3Gb/s, 40km

LIGENT LTX54XX Optical Transceiver

MPN:

LTX54XX

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTX54XX XFP LC duplex optical transceiver is intended for 40km reach service in 10Gb/s DWDM high-speed telecommunications equipment where low-cost, extraordinary performance and reliability are essen-tial. They consume low power, operates from a 5V, a 3.3V and a 1.8V DC power supply and is offered in the industrial temperature range. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC. It can support C to C+ band wavelength adjustment. The module is set at the C-Band grid.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • Dual Wavelength Bidirectional Transceiver
  • 2x15 XFP Die Cast Housing
  • LC Duplex Optical Interface
  • Case Operating Temperature: Industrial: -40 to 85°C

CWDM Optical Transceiver, 40 Gb/s, 10km With DDM

LIGENT LTA13XX-PC Optical Transceiver

MPN:

LTA1305

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTA1305 QSFP+ Optical transceiver is intended for the service with single mode fibre in 40Gb/s high speed data communications and computing applications. It meets the requirements of QSFP+ MSA, IEEE802.3ba 40GBASE-LR4, operates from a 3.3V DC power supply and is offered in the com-mercial temperature range. The module has an aggregate link bandwidth in excess of 40Gb/s by multi-plexing of 4 CWDM optical lanes, each lane capable of transmitting 10.3125Gb/s over 10km on SMF optical fibre. It is fabricated with a rugged die cast metal housing and cage assembly. The device is Class I laser safety compliant and meets the EU Directive 2002/95/EC for RoHS compliance.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent optical lanes
  • Lane data rate of 10.3125Gb/s
  • Aggregate data rate in excess of 41Gb/s (over 4 lanes)
  • Hot Pluggable
  • 10km link on SMF single-mode Fiber
  • CWDM Laser/ Pin PD Array Technology
  • QSFP+ MSA Compatible electrical I/O
  • Case Operating Temperature: Commercial: 0 to 70°C
  • Digital diagnostic capabilities
  • +3.3V power supply
  • RoHS compliance

QSFP+ SR4 FDR Optical Transceiver, 4 x 14.0625Gb/s, 850nm Transceiver

LIGENT LTA85XX Optical Transceiver

MPN:

LTA8520

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTA8520 is a QSFP+ Optical transceiver for 4 x 14Gb/s optical links. It is compliant with the QSFP+ MSA. It operates at 14.0625Gb/s up to 100m over OM4 fibre.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Each channel data rate up to 14.0625Gb/s
  • Hot Pluggable
  • Up to 100m link on OM4 Multi-mode Fiber
  • 850nm VCSEL/PD Array Technology
  • CML Compatible electrical I/O
  • Low power consumption of 1.0W
  • QSFP+ MSA Compliance
  • Case Operating Temperature: Commercial: 0 to 70°C
  • RoHS IIcompliance

QSFP28 Optical Transceiver, CWDM 4 X 25Gb/s, 2km With DDM

LIGENT LTA13XX-PC Optical Transceiver

MPN:

LTA1304

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTA1304 QSFP28 Optical transceiver is intended for the service with single mode fibre in 103.125Gb/s high speed data communications and computing applications. It meets the require-ments of QSFP28 MSA, 100G-CLR4,CWDM4 MSA, operates from a 3.3V DC power supply and is offered in the commercial temperature range. The module has an aggregate link bandwidth in excess of 100Gb/s by multiplexing of 4 CWDM optical lanes, each lane capable of transmitting 25.78125Gb/s over 2km on SMF optical fibre. It is fabricated with a rugged die cast metal housing and cage assembly. The device is Class I laser safety compliant and meets the EU Directive 2002/95/EC for RoHS compliance.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent optical lanes
  • Lane data rate of 25.78125Gb/s
  • Aggregate data rate in excess of 103.125Gb/s (over 4 lanes)
  • Hot Pluggable
  • 2km link on SMF single-mode Fiber
  • CWDM Laser/ Pin PD Array Technology
  • QSFP28 MSA Compatible electrical I/O
  • Case Operating Temperature: Commercial: 0 to 70°C
  • Digital diagnostic capabilities
  • +3.3V power supply
  • RoHS compliance

QSFP28 Optical Transceiver, 4 x 25Gb/s, 850nm Transceiver with DDM

LIGENT LTA85XX Optical Transceiver

MPN:

LTA8531

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTA8531 is a QSFP28 Optical transceiver for 4 x 25Gb/s optical links. It is compliant with the QSFP28 MSA, IEEE P802.3bm 100GBASE- SR4 specifications. It operates at 25.78Gb/s up to 100m over OM4 Multi-mode fibre.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Each channel data rate up to 25.78Gb/s with integrated CDR
  • Hot Pluggable
  • Up to 100m link on OM4 Multi-mode Fiber
  • 850nm VCSEL/PD Array Technology
  • CML Compatible electrical I/O
  • QSFP28 MSA Compliance
  • Optical connectivity via industry standard MPO/MTP terminated fiber ribbon Case Operating Temperature: Commercial: 0 to 70°C
  • RoHS II Compliance

CFP2 Optical Transceiver, 100Gb/s, 10km

LIGENT LTV13XX Optical Transceiver

MPN:

LTV1304

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTV1304 is a low power consumption CFP2 transceiver with high performance up to 103.125Gb/s high speed telecom and data communications over single mode fibre. It is compliant with the CFP2 MSA, IEEE802.3ba 100GBase LR4 specifications. It operates from a 3.3V DC power supply and is offered in the commercial temperature range. The module has an aggregate link bandwidth in excess of 100Gb/s by using 4 electrical lanes , each capable of transmitting 25.78Gb/s, 4 optical lanes, each capable of 25.78 Gb/s over 10km single mode fibre. It is fabricated with a rugged metal housing. The device is Class I laser safety compliant and meets the EU Directive 2002/95/EC for RoHS compliance.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 electrical, 4 optical lanes
  • Aggregate data rate in excess of 103.125Gb/s
  • Hot Pluggable CFP2 form factor
  • 10km link on SMF
  • Cooled 4x25G LAN-WDM transmitter
  • Case Operating Temperature: Commercial: -5 to 70°C
  • Digital diagnostic capabilities
  • +3.3V power supply
  • CFP2 MSA Compliance

CFP4 Optical Transceiver, 100Gb/s, 10km

LIGENT LTV13XX Optical Transceiver

MPN:

LTV1305

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTV1304 is a low power consumption CFP2 transceiver with high performance up to 103.125Gb/s high speed telecom and data communications over single mode fibre. It is compliant with the CFP2 MSA, IEEE802.3ba 100GBase LR4 specifications. It operates from a 3.3V DC power supply and is offered in the commercial temperature range. The module has an aggregate link bandwidth in excess of 100Gb/s by using 4 electrical lanes , each capable of transmitting 25.78Gb/s, 4 optical lanes, each capable of 25.78 Gb/s over 10km single mode fibre. It is fabricated with a rugged metal housing. The device is Class I laser safety compliant and meets the EU Directive 2002/95/EC for RoHS compliance.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 electrical, 4 optical lanes
  • Aggregate data rate in excess of 103.125Gb/s
  • Hot Pluggable CFP4 form factor
  • 10km link on SMF
  • Cooled 4x25G LAN-WDM transmitter
  • Case Operating Temperature: Commercial: -5 to 70°C
  • Digital diagnostic capabilities
  • +3.3V power supply
  • CFP4 MSA Compliance

QSFP+ Active Optical Cable, 50Gb/s optical links, up to 100m

LIGENT DQF85XX-AOC Optical Transceiver

MPN:

DQF8502

Manufacturer L3 Communications

Hisense Broadband

Description:

The DQF8502 is a QSFP+ active optical cable (AOC) for 56Gb/s optical links. It is compliant with the QSFP+ MSA. It operates at 14.0625Gb/s and the cable length is up to 100m.

Please contact your local sales for the specification

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Channel data rate up to 14.0625Gb/s
  • Hot Pluggable
  • Up to 100m link over Multi-mode Fiber
  • CML Compatible electrical I/O
  • Low power consumption of 1.0 W
  • QSFP+ MSA Compliance
  • Case Operating Temperature: Commercial: 0 to 70°C
  • RoHS compliance

QSFP28 Active Optical Cable, 100Gb/s optical links, up to 100m

LIGENT DQF85XX-AOC Optical Transceiver

MPN:

DQF8503

Manufacturer L3 Communications

Hisense Broadband

Description:

The DQF8503 is a QSFP28 active optical cable (AOC) for 100Gb/s optical links. It is compliant with the QSFP28 MSA, IEEE P802.3bm 100GBASE- SR4 specifications. It operates at 25.78Gb/s and the cable length is up to 100m.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 4 independent parallel optical channels
  • Channel data rate up to 25.78Gb/s
  • Hot Pluggable
  • Up to 100m link over OM4 Multi-mode Fiber
  • CML Compatible electrical I/O
  • QSFP28 MSA Compliance
  • Case Operating Temperature Range: Commercial: 0 to 70°C
  • RoHS compliance

SFP+ Active Optical Cable, 10Gb/s Ethernet

LIGENT LTF8506 Optical Transceiver

MPN:

LTF8506

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTF8506 is a SFP+ active optical cable (AOC) for 100Gb/s optical links. It is compliant with the SFF8431 for electrical specifications, and SFF8431 mechanical specifications. It operates up to 10.3125Gb/s and the cable length is up to 100m.

Please contact your local sales for the specification

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • Up to 100m link over OM2 Multi-mode Fiber
  • Enhaced EMi performance
  • Power consumption less than 0.8W
  • SFP+ MSA compliant package
  • Case Operating Temperature Range: Commercial: 0 to 70°C
  • RoHS compliance

SFP+ DWDM Optical Transceiver, C-Band, 9.95 to 11.3Gb/s, 80km with CDR

LIGENT LTF58XX Optical Transceiver

MPN:

LTF58XX

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTF58XX SFP+ optical transceiver is intended for 80km reach service from 9.95Gb/s to 11.3Gb/s DWDM high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It consumes low power, operates from a 3.3V DC power supply and is offered in the commercial temperature range and industrial temperature range. They are compliant with IEEE802.3ae 10GBASE-ZR/ZW , SFF-8431 and SFF-8432. It incorporates the SFP+ MSA LVTTL Loss of Signal (Rx_LOS), Tx Fault (Tx_FAULT), Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFP+ MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 2x10 SFP+ MSA compliant package
  • 80km reach
  • Internal Tx/Rx CDR
  • Single mode
  • Single 3.3V power supply
  • LC duplex transceiver
  • Hot pluggable
  • RoHS compliance
  • Case Operating Temperature Range: Commercial: 0 to 70°C /Industrial: -40 to 85°C

Electrical Transceiver over Category 5 Cable, 1000BASE-T, 1.25Gb/s Bi-directional data links

LIGENT LTE10xx Optical Transceiver

MPN:

LTE1032

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTE1032 is full-duplex throughput of 1000Mbps by transporting data over shielded and un-shielded twisted pair category 5 cable with 5-level PAM (Pulse Amplitude Modulation) signals. The module takes signals from both the twisted pair category 5 cable and the SGM II interface. Pin count overhead between the MAC and the PHY is minimized, and Gigabit Ethernet operation is achieved with maximum space savings.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 1.25Gb/s bi-directional data links
  • Hot-pluggable SFP footprint
  • Fully metallic enclosure for low EMI
  • Low power dissipation
  • Single +3.3V power supply opera-tion
  • Case Operating Temperature Range: Commercial: 0°C to +70°C, Extended: 0°C to +85°C, Industrial: -40°C to +85°C

SFP+ DWDM Optical Transceiver, C-Band DWDM, 9.95 to 11.3Gb/s, 40km with CDR

LIGENT LTF54XX Optical Transceiver

MPN:

LTF54XX

Manufacturer L3 Communications

Hisense Broadband

Description:

The LTF54XX SFP+ transceiver is intended for 40km reach service from 9.95Gb/s to 11.3Gb/s DWDM high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It consumes low power, operates from a 3.3V DC power supply and is offered in the commercial temperature range and industrial temperature range. They are compliant with IEEE802.3ae 10GBASE-ER/EW , SFF-8431 and SFF-8432. It incorporates the SFP+ MSA LVTTL Loss of Signal (Rx_LOS), Tx Fault (Tx_FAULT), Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFP+ MSA.

View our wide range of Fibre optic transceivers / modules / accessories

View our portfolio of fibre optics components

See all products from our supplier Hisense Broadband

Features:

  • 2x10 SFP+ MSA compliant package
  • 40km reach
  • Internal Tx/Rx CDR
  • Single mode
  • Single 3.3V power supply
  • LC duplex transceiver
  • Hot pluggable
  • RoHS compliance

Multi-mode Transceiver, 2.488 Gb/s ATM, SFF Bi-Di, Single SC Connector, 1550 nm FP LD

Ballard TechOmniBoxII Interface

MPN:

CT-2500TBF-LB1C

Manufacturer L3 Communications

Coretek

Description:

The CT-2500TBF-LB1C from Coretek Opto Corp. is a high performance and cost-effective module for serial optical data communication applications specified for multi-rate from 1.062 to 2.67 Gb/s. It operates with +3.3 V power supply. The module is intended for multi-mode fiber, operates at a nominal wavelength of Tx: 1550 nm / Rx: 1310 nm and complies with Multi-Source Agreement (MSA) Small Form Factor (SFF) 2x5 footprint. Each module consists of a bi-directional optical subassembly that combines a transmitter with a receiver and an electrical subassembly.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1550 nm FP LD
  • Multi-rate: from 1.062 to 2.67 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor (SFF) 2x5 Footprint
  • Single SC Connector
  • Compliance with ATM standard
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gb/s
  • Compliance with ANSI specifications for Fibre Channel applications at 1.06 Gb/s
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

Multi-mode Transceiver, 2.488 Gb/s ATM, SFF Bi-Di, Single SC Connector, 1310 nm FP LD

Ballard TechOmniBoxII Interface

MPN:

CT-2500TBF-MB1C

Manufacturer L3 Communications

Coretek

Description:

The CT-2500TBF-MB1C from Coretek Opto Corp. is a high performance and cost-effective module for serial optical data communication applications specified for multi-rate from 1.062 to 2.67 Gb/s. It operates with +3.3 V power supply. The module is intended for multi-mode fiber, operates at a nominal wavelength of Tx: 1310 nm / Rx: 1550 nm and complies with Multi-Source Agreement (MSA) Small Form Factor (SFF) 2x5 footprint. Each module consists of a bi-directional optical subassembly that combines a transmitter with a receiver and an electrical subassembly. The module is a single fiber connector transceiver designed to provide ATM/SONET OC-48/SDH STM-16 compliant link at 2.488 Gb/s, Gigabit Ethernet compliant link at 1.25 Gb/s, Fibre Channel compliant link at 1.062 and 2.125 Gb/s applications.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • 1310 nm FP LD
  • Multi-rate: from 1.062 to 2.67 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor (SFF) 2x5 Footprint
  • Single SC Connector
  • Compliance with ATM standard
  • Compliance with specifications for IEEE-802.3z Gigabit Ethernet at 1.25 Gb/s
  • Compliance with ANSI specifications for Fibre Channel applications at 1.06 Gb/s
  • Eye Safety Designed to Laser Class 1 comply with EN60825-1

DFB Coaxial Laser, CWDM, 1270-1610nm

AGx PLMF1 CWDM DFB Laser

MPN:

PLMF1

Manufacturer L3 Communications

AGx

Description:

PLMF1 series module coaxial DFB Laser is especially suited as a low cost light source for analog CATV forward path (with external cooling), as well as RF over fiber applications. The PLMF1XXC series module incorporates a highly linear MQW DFB laser emitting at ITU CWDM wavelengths from 1270-1610 nm, hermetically sealed in an industry standard coaxial package with a single mode fiber pigtail.

View our wide range of Fibre optic transmitters

View our portfolio of FO Actives components

See all products from our supplier AGx Technologies

Features:

  • Wavelength available: from 1270 nm to 1610 nm in 20nm increments
  • Operating Temperature: -20°C to 45°C
  • Output power range available: ≥2, ≥4, ≥6, ≥8, ≥10, ≥12 mW
  • Optical Isolation: Single or double isolator
  • Connector type: SC/APC or FC/APC

Dual Transmitter, 850nm, VSCEL, Multimode, 10-155 Mb/s ATM

Coretek CT-0155 Dual Transmitter Receiver

MPN:

CT-0155NTP-SB2L-E P2

Manufacturer L3 Communications

Coretek

Description:

The CT-0155NTP-SB2L-E P2 is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 10-155 Mb/s. It operates with +3.3 V power supply. The module is intended for multi-mode fiber, operates at a nominal wavelength of 850 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of dual transmitter optical subassembly and an electrical subassembly and it is integrated digital diagnostics functions via an I2C serial interface.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre Optics Components

See all products from our supplier Coretek

Features:

  • 850 nm VCSEL
  • Data Rate: 10-155 Mb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Duplex LC Connector
  • Compliance with 100Base-FX of IEEE802.3u Standard
  • Compliance with FDDI PMD Standard
  • Compliance with ATM Standard

Dual Receiver, 850nm, Multimode, 10-155 Mb/s ATM

Coretek CT-0155 Dual Transmitter Receiver

MPN:

CT-0155NRP-SB2L-E P2

Manufacturer L3 Communications

Coretek

Description:

The CT-0155NTP-SB2L-E P2 from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data-rates of 10-155 Mb/s. It operates with +3.3 V power supply. The module is intended for multi-mode fiber, operates at a nominal wavelength of 850 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of dual transmitter optical subassembly and an electrical subassembly and it is integrated digital diagnostics functions via an I2C serial interface.

View our wide range of Fibre optic transceivers

View our portfolio of Fibre Optics Components

See all products from our supplier Coretek

Features:

  • Dual 850 nm Photodiodes
  • Data Rate: 10-155 Mb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Duplex LC Connector
  • Compliance with 100Base-FX of IEEE802.3u Standard
  • Compliance with FDDI PMD Standard
  • Compliance with ATM Standard

Pigtailed photodiode for CATV and SAT applications, up to 6 GHz bandwidth

PPDK

MPN:

PPDK

Manufacturer L3 Communications

AGx

Description:

The PPDK series module for CATV and SAT applications up to 6 GHz incorporates a highly linear photodiode sensitive to the wavelength range between 1100 nm and 1650 nm. This module is a hermetically sealed coaxial package with a single mode fibre pigtail.

Features:

  • High linearity, low capacitance photodiode
  • Low back reflection in package
  • CATV and SAT node receivers
  • Wide RF bandwidth up to 6 GHz
  • Wide operating temperature range
  • RoHS compliant

X2-SFP+ Converter Module, Transceiver

ACAL BFI X2-SFP+ Converter Module

MPN:

AB-X2-SFP+

Manufacturer L3 Communications

Acal BFi - Fibre optics

Description:

The XG-X2-SFP+ Converter Module converts a 10 Gigabit Ethernet X2 port into a 10 Gigabit Ethernet SFP+ port. With the Converter Module, customers have the flexibility to use the 10 Gigabit X2 interface port of a switch with X2 modules or SFP+ modules.

View our wide range of Actives

View our portfolio of Fibre optics

See all products from our supplier Acal BFi

Features:

  • XAUI Electrical Interface: 4 Lanes @ 3.125Gbit/s
  • Hot Pluggable
  • MDIO, DOM Support
  • Compliant to X2 MSA
  • Case operating temperature: 0 to 70°C

XENPAK-SFP+ Converter Module, Transceiver

ACAL BFI XENPAK-SFP+ Converter Module

MPN:

AB-XENPAK-SFP+

Manufacturer L3 Communications

Acal BFi - Fibre optics

Description:

The XG-XENPAK-SFP+ Converter Module converts a 10 Gigabit Ethernet XENPAK port into a 10 Gigabit Ethernet SFP+ port. With the Converter Module, customers have the flexibility to use the 10 Gigabit XENPAK interface port of a switch with XENPAK modules or SFP+ modules.

View our wide range of Actives

View our portfolio of Fibre optics

See all products from our supplier Acal BFi

Features:

  • XAUI Electrical Interface: 4 Lanes @ 3.125Gbit/s
  • Hot Pluggable
  • MDIO, DOM Support
  • Compliant to XENPAK MSA
  • Case operating temperature: 0 to 70°C

Optical Video Transceiver, 3 Gb/s, SFP Bi-Di, 1550 nm DFB LD, Single SC Connector

Coretek CT-2500TBT-KB6C Transceiver

MPN:

CT-2500TBP-KB6C-E

Manufacturer L3 Communications

Coretek

Description:

The CT-2500TBP-KB6C-E from Coretek Opto Corp. is a high performance and cost-effective module for serial optical data communication applications specified for multi-rate from 50 Mb/s to 3 Gb/s. It operates with a +3.3 V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of Tx: 1550 nm / Rx: 1310 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module has integrated digital diagnostics functions via an I2C serial interface.

View our wide range of Actives

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 1550 nm DFB LD
  • Multi-rate: from 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Single SC Connector
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Eye Safety Designed to meet

Optical Video Transceiver, 3 Gb/s, SFP Bi-Di, 1310 nm DFB LD, Single SC Connector

Coretek CT-2500TBT-NB6C Transceiver

MPN:

CT-2500TBP-NB6C-E

Manufacturer L3 Communications

Coretek

Description:

The CT-2500TBP-NB6C-E from Coretek Opto Corp. is a high performance and cost-effective module for serial optical data communication applications specified for multi-rate from 50 Mb/s to 3 Gb/s. It operates with a +3.3 V power supply. The module is intended for single mode fibre, operates at a nominal wavelength of Tx: 1310 nm / Rx: 1550 nm and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module has integrated digital diagnostics functions via an I2C serial interface.

View our wide range of Actives

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 1310 nm DFB LD
  • Multi-rate: from 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP)
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Single SC Connector
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Eye Safety Designed to meet

3 Gb/s Dual 1310nm Optical Transmitter

CT-2500Series

MPN:

CT-2500TTP-MB4L-D AB

Manufacturer L3 Communications

Coretek

Description:

The CT-2500TTP-MB4L-D AB series from Coretek Opto Corp. features SFP, LC Connector, Dual 1310 nm FP Transmitter for Single Mode Fibre, RoHS Compliant. This module is the high performance and cost-effective modules for serial optical data communication applications specified for data-rates of 3 Gb/s.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 1310 nm FP LD
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC or DC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (TX
  • Power , Bias current , Supply voltage and Operating temperature)
  • Duplex LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Dual CWDM Optical Transmitter

CT-2500TTP-CB6L

MPN:

CT-2500TTP-CB6L-D AB XXYY

Manufacturer L3 Communications

Coretek

Description:

CT-2500TTP-CB6L-D AB XXYY series from Coretek Opto Corp. are the high performance and cost-effective modules for serial optical data communication applications specified for data-rates of 3 Gb/s. The CT-2500TTP-CB6L-D AB XXYY module is SFP, LC Connector, Dual CWDM Transmitter for Single Mode Fibre, RoHS Compliant

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 18 CWDM Wavelengths: 1270nm, 1290nm, 1310nm, 1330nm, 1350nm, 1370nm, 1390nm, 1410nm, 1430nm, 1450nm, 1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm, 1610nm
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC or DC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (TX
  • Power , Bias current , Supply voltage and Operating temperature)
  • Duplex LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Dual Optical Receiver 1260-1620nm

CT-2500Series

MPN:

CT-2500TRP-MB4L-D AB

Manufacturer L3 Communications

Coretek

Description:

The CT-2500TRP-MB4L-D AB series is SFP, LC Connector, Dual Receiver for Single Mode Fibre, 30km, RoHS Compliant.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 1260~1620 nm PIN-TIA
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (Received Power, Supply voltage and Operating temperature)
  • Duplex LC Connector

3 Gb/s CWDM Optical Video Transceiver

CT-2500Series

MPN:

CT-2500TVP-CB6L-D XX

Manufacturer L3 Communications

Coretek

Description:

CT-2500TVP-CB6L-D XX series SFP, LC Connector, CWDM Transceiver for Single Mode Fibre, RoHS Compliant.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 18 CWDM Wavelengths: 1270nm, 1290nm, 1310nm, 1330nm, 1350nm, 1370nm, 1390nm, 1410nm, 1430nm, 1450nm, 1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm, 1610nm
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • DC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Duplex LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Optical Video Transceiver 1310nm

CT-2500Series

MPN:

CT-2500TVP-MB4L-D

Manufacturer L3 Communications

Coretek

Description:

CT-2500TVP-MB4L-D series is SFP, LC Connector, 1310 nm FP Transceiver for Single Mode Fibre, 30km, RoHS Compliant.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 1310 nm FP LD
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • DC/AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Compliant with SFF-8472 Digital Diagnostic Monitoring Interface
  • Duplex LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Single Channel Optical Receiver 1260-1620nm

CT-2500TKP-Optical-Receiver

MPN:

CT-2500TKP-MB4L-D

Manufacturer L3 Communications

Coretek

Description:

Module CT-2500TKP-MB4L-D series is LC connector with single channel receiver for Single Mode Fibre, 30km, RoHS Compliant.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (Received Power, Supply voltage and Operating temperature)
  • LC Connector

3 Gb/s Single Channel Optical Transmitter 1310nm

CT-2500TJP-Optical-Transmitter

MPN:

CT-2500TJP-MB4L-D

Manufacturer L3 Communications

Coretek

Description:

Module CT-2500TJP-MB4L-D series is 1310nm SFP, LC Connector, Single Transmitter for Single Mode Fibre, 30km, RoHS Compliant.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 1310 nm FP LD
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • DC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (TX Power , Bias current , Supply voltage and Operating temperature)
  • LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s CWDM Single Channel Optical Transmitter 1210-1610nm

CT-2500TJP-Optical-Transmitter

MPN:

CT-2500TJP-CB4L-D

Manufacturer L3 Communications

Coretek

Description:

CT-2500TJP-CB4L-D XX module offers 18 CWDM wavelengths from 1270nm to 1610nm with SFP, LC Connector, Single CWDM Transmitter for Single Mode Fibre, RoHS Compliant

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 18 CWDM Wavelengths: 1270nm, 1290nm, 1310nm, 1330nm, 1350nm, 1370nm, 1390nm, 1410nm, 1430nm, 1450nm, 1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm, 1610nm
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • DC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (TX Power , Bias current , Supply voltage and Operating temperature)
  • LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Single Channel Optical Transmitter 1210-1610nm

CT-2500TJP-Optical-Transmitter

MPN:

CT-2500TJP-CB6L-D

Manufacturer L3 Communications

Coretek

Description:

CT-2500TJP-CB6L-D XX series offers 18 wavelgnths from 1270nm to 1610nm with SFP, LC Connector, Single Channel Transmitter for Single Mode Fibre, 30km, RoHS Compliant.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 18 CWDM Wavelengths: 1270nm, 1290nm, 1310nm, 1330nm, 1350nm, 1370nm, 1390nm, 1410nm, 1430nm, 1450nm, 1470nm, 1490nm, 1510nm, 1530nm, 1550nm, 1570nm, 1590nm, 1610nm
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • DC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (TX Power, Bias current , Supply voltage and Operating Temperature)
  • LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Dual Optical Transmitter 1550nm / 1330nm

CT-2500TBP-CB5L-D ABT5531

MPN:

CT-2500TBP-CB5L-D ABT5531

Manufacturer L3 Communications

Coretek

Description:

CT-2500TBP-CB5L-D ABT5531 3 Gb/s Dual Optical Transmitter SFP Bi-Di, Single LC Connector, 1550 nm / 1310 nm Dual Transmitter for Single Mode Fibre, RoHS Compliant.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 1550 nm FP LD and 1310 nm DFB LD
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Single LC Connector
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (TX Power , Bias current , Supply voltage and Operating temperature)
  • Duplex LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

3 Gb/s Dual Optical Receiver 1550nm / 1330nm

CT-2500TBP-CB5L-D ABR5531

MPN:

CT-2500TBP-CB5L-D ABR5531

Manufacturer L3 Communications

Coretek

Description:

CT-2500TBP-CB5L-D ABR5531 is 3 Gb/s Dual Optical Receiver with SFP Bi-Di, Single LC Connector, 1550 nm / 1310 nm Dual Receiver for Single Mode Fibre, RoHS Compliant.

View our wide range of Transformers

View our portfolio of Fibre optics

See all products from our supplier Coretek

Features:

  • 1550 nm and 1310nm PIN-TIAs
  • Data Rate: 50 Mb/s to 3 Gb/s, NRZ
  • Single +3.3 V Power Supply
  • RoHS Compliant and Lead-free
  • AC Differential Electrical Interface
  • Compliant with Multi-Source Agreement (MSA)
  • Small Form Factor Pluggable (SFP)
  • Single LC Connector
  • Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
  • Digital Diagnostic Monitoring Interface (RX Power , Supply voltage and Operating temperature)
  • Duplex LC Connector
  • Eye Safety Designed to meet Laser Class 1 comply with EN60825-1

YDFA (Ytterbium-doped fibre amplifier) series 1µm

YDFA-SC

MPN:

YDFA-SC

Manufacturer L3 Communications

AC Photonics

Description:

The YDFA-SC series of stand-alone devices with the user-friendly front panel and OEM units are designed for a wide range of applications. QGLex covers a wide range of applications with its high performance and high power Ytterbium doped fibre amplifiers such as Industrial and Scientific applications. The 1µm YDFA-SCs are available with power up to 20dBm. QGLex amplifiers are available in OEM integrated packages or plug-and-play Benchtop format with a wide range of options such as polarization maintaining or pulse amplification. All YDFA-SCs are available in Bench Top, 1U 19 inch Rack-mount, Gain Block or Module formats.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Wide range of power from 14 dBm to 20 dBm
  • RS232 or USB interface
  • High plug-in efficiency
  • High performance-to-cost ratio
  • Custom design flexibility

YDFA (Ytterbium-doped fibre amplifier) series 1µm

YDFA-DC

MPN:

YDFA-DC

Manufacturer L3 Communications

AC Photonics

Description:

The YDFA-DC series of stand-alone devices with the user-friendly front panel and OEM units are designed for a wide range of applications. QGLex covers a wide range of applications with its high performance and high power Ytterbium doped fibre amplifiers such as Industrial and Scientific applications. The 1µm YDFA-DCs are available with power up to 50W. QGLex amplifiers are available in OEM integrated packages or plug-and-play Benchtop format with a wide range of options such as polarization maintaining or pulse amplification. All YDFA-DCs are available in Bench Top, 19inch Rack-mount, Gain Block or Module formats.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Wide range of power from 30 dBm to 46 dBm
  • RS232 or USB interface
  • High performance-to-cost ratio
  • Custom design flexibility

EDFA (Erbium-doped fibre amplifier) series

EDFA

MPN:

EDFA

Manufacturer L3 Communications

AC Photonics

Description:

The EDFA-E series of stand-alone devices with the user-friendly front panel and OEM units are designed for a wide range of applications. These wall-plug units include a wide selection of Boosters, Pre-amplifiers, In-Line, Mid-Stage access and Gain-Flattened amplifiers. The Rack- mount EDFA-E series of high performance, low noise and high output power amplifiers provide the perfect opportunity to build flexible CATV network systems. These EDFA-Es are available in both single channel and DWDM configurations. All EDFA-Es are available in Bench Top, 1U 19 inch Rack-mount, Gain Block or Module formats.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Wide range of power from 14 dBm to 25 dBm
  • Choice of wavelengths C-, L- and C+L-bands
  • Near quantum-limited noise figure preamplifiers
  • RS232 or USB interface
  • High performance-to-cost ratio
  • Custom design flexibility

EYDFA (Erbium Ytterbium-doped fibre amplifier) series

EYDFA

MPN:

EYDFA

Manufacturer L3 Communications

AC Photonics

Description:

The EYDFA series of stand-alone devices with the user-friendly front panel and OEM units are designed for a wide range of applications. The Rack- mount EYDFA series of high performance, low noise and high output power amplifiers provide the perfect opportunity to build flexible CATV network systems. These EYDFAs are available in both single channel and DWDM configurations. All EYDFAs are available in Bench Top, 19 inch Rack-mount, Gain Block or Module formats.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Wide range of power from 30 dBm to 36 dBm
  • Low noise figure
  • RS232 or USB interface
  • High plug-in efficiency
  • High performance-to-cost ratio
  • Custom design flexibility

EDFA optical fibre amplifiers for CATV applications

OAB-C-E

MPN:

OAB-C-E

Manufacturer L3 Communications

AC Photonics

Description:

The OAB-C-E series of high performance, high output power and low noise Erbium Doped fibre Amplifiers provide the perfect opportunity to build flexible CATV network systems. These amplifiers are available in both single channel and DWDM configurations. OAB-C-E series offer a very wide range of output power with very high reliability. OAB-C-E series can be customized to meet special customer requirements. All OAB-C-Es are available in 19 inch Rack-mount, Module or Gain Block formats.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Wide range of Output Power from 14 dBm to 27dBm
  • Low noise figure
  • Multi-Output Option up to 8 ports
  • RS232 or USB interface
  • High performance-to-cost ratio
  • Low CSO and CTB
  • Custom design flexibility

EYDFA optical fibre amplifiers for CATV applications

OAB-C-EY

MPN:

OAB-C-EY

Manufacturer L3 Communications

AC Photonics

Description:

The OAB-C-EY series of high performance, high output power and low noise Erbium Ytterbium Doped fibre Amplifiers provide the perfect opportunity to build flexible CATV network systems. These amplifiers are available in both single channel and DWDM configurations. OAB-C-EY series offer a very wide range of output power with very high reliability. OAB-C-EY series can be customized to meet special customer requirements. All OAB-C-EYs are available in 19 inch Rack-mount, Module or Gain Block formats.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Wide range of Output Power from 30 dBm to 36dBm
  • Low noise figure
  • Multi-Output Option up to 8 ports
  • RS232 or USB interface
  • High performance-to-cost ratio
  • Low CSO and CTB
  • Custom design flexibility

Amplified Spontaneous Emission Broadband Light Source 1µm

ASE-Y

MPN:

ASE-Y

Manufacturer L3 Communications

AC Photonics

Description:

The 1µm Amplified Spontaneous Emission (ASE) light source series provide a wide wavelength Covering from 1030 nm to 1080 nm and high output power to help you maximize your capabilities of optical component spectral measurements and systems compliance tests both in manufacturing and R&D environments. All ASE-Ys are available in Bench Top, 1U 19 inch Rack-mount. Gain Block or Module formats.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • High Output Power from 13 dBm to 20 dBm
  • Wavelengths range from 1030nm to 1080nm
  • Wide spectral bandwidth
  • High power density
  • High spectral stability
  • Multi-Output Option up to 4 ports
  • RS232 or USB interface
  • High performance-to-cost ratio
  • Optional build-in attenuator and optical Power monitor
  • Custom design flexibility

Amplified Spontaneous Emission Broadband Light Source 1.5µm

ASE-E

MPN:

ASE-E

Manufacturer L3 Communications

AC Photonics

Description:

Amplified Spontaneous Emission (ASE) light source series provide a wide wavelength range and high output power to help you maximize your capabilities of optical component spectral measurements and systems compliance tests both in manufacturing and R&D environments. All ASE-Es are available in Bench Top, 1U 19 inch Rack-mount. Gain Block or Module formats.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • High Output Power from 13 dBm to 24 dBm
  • Choice of wavelengths C-, L- and C+L-bands
  • Wide spectral bandwidth
  • High power density
  • High spectral stability
  • Multi-Output Option up to 4 ports
  • RS232 or USB interface
  • High performance-to-cost ratio
  • Optional build-in attenuator and optical Power monitor
  • Custom design flexibility

Wavelength Conversion Module for 578nm Light Generation

NEL Photonics Business Group WS Wavelength Conversion Module for 578nm Light Generation

MPN:

WS

Manufacturer L3 Communications

NEL Photonics Business Group

Description:

Wavelength Conversion Module for 578nm Light Generation. SFG wavelength 578nm. Conversion efficiency >100% / W.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier NEL Photonics Business Group

Features:

  • SFG wavelength 578nm
  • Conversion efficiency >100% / W

Wavelength Conversion Module for 780nm Light Generation

NEL Photonics Business Group WH Wavelength Conversion Module for 780nm Light Generation

MPN:

WH

Manufacturer L3 Communications

NEL Photonics Business Group

Description:

Wavelength Conversion Module for 780nm Light Generation. SFG wavelength 780nm. Conversion efficiency >100% / W.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier NEL Photonics Business Group

Features:

  • SFG wavelength 780nm
  • Conversion efficiency >100% / W

Wavelength Conversion Mid-IR Laser Opti λ 3360

NEL Photonics Business Group WD Wavelength Conversion Mid-IR Laser Opti λ 3360

MPN:

WD

Manufacturer L3 Communications

NEL Photonics Business Group

Description:

Wavelength Conversion Mid-IR Laser Opti λ 3360. 500 μW (@3360nm). High beam quality, low power consumption and real-time sensing.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier NEL Photonics Business Group

Features:

  • 500 μW (@3360nm)
  • High Beam Quality
  • Low Power Consumption
  • Real Time Sensing

Uni-directional 1x2 solid-state fibre optic switches

AC Photonics SWU150102 Unidirectional 1x2 Solid-State Fiberoptic Switches

MPN:

SWU150102

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's SW Series switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using patent pending non-mechanical proprietary configurations and activated via an electrical control signal. The solid-state operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The SW fibreoptic switches are true switching solutions for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Fast Switching Speed
  • Ultra-High Reliability
  • Latching
  • High Repeatability
  • Low Cost

Bi-directional 1x2 solid-state fibre optic switches

AC Photonics SWB150102 Bidirectional 1x2 Solid-State Fiberoptic Switches

MPN:

SWB150102

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's SW Series switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using patent pending non-mechanical proprietary configurations and activated via an electrical control signal. The solid-state operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The SW fibreoptic switches are true switching solutions for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Fast Switching Speed
  • Ultra-High Reliability
  • Latching
  • High Repeatability
  • Low Cost

Uni-directional 1x4 solid-state fibre optic switch module

AC Photonics SWU150104 Unidirectional 1x4 Solid-State Fiberoptic Switch Module

MPN:

SWU150104

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's SW Series switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using patent pending non-mechanical proprietary configurations and activated via an electrical control signal. The solid-state operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The SW fibreoptic switches are true switching solutions for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Fast Switching Speed
  • Ultra-High Reliability
  • Latching
  • High Repeatability
  • Low Cost

Bi-directional 1x4 solid-state fibre optic switch module

AC Photonics SWB150104 Bidirectional 1x4 Solid-State Fiberoptic Switch Module

MPN:

SWB150104

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's SW Series switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using patent pending non-mechanical proprietary configurations and activated via an electrical control signal. The solid-state operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The SW fibreoptic switches are true switching solutions for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Fast Switching Speed
  • Ultra-High Reliability
  • Latching
  • High Repeatability
  • Low Cost

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB8L 1550 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB8L 1550

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1550nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB8L 1570 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB8L 1570

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1570nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB8L 1590 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB8L 1590

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1590nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB8L 1610 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB8L 1610

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1610nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx8L 1470 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx8L 1470

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 80km, Single Mode, Dual Fibre, CWDM, 1470nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx8L 1490 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx8L 1490

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 80km, Single Mode, Dual Fibre, CWDM, 1490nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx8L 1510 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx8L 1510

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 80km, Single Mode, Dual Fibre, CWDM, 1510nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx8L 1530 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx8L 1530

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 80km, Single Mode, Dual Fibre, CWDM, 1530nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx8L 1550 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx8L 1550

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 80km, Single Mode, Dual Fibre, CWDM, 1550nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx8L 1570 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx8L 1570

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 80km, Single Mode, Dual Fibre, CWDM, 1570nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx8L 1590 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx8L 1590

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 80km, Single Mode, Dual Fibre, CWDM, 1590nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx8L 1610 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx8L 1610

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 80km, Single Mode, Dual Fibre, CWDM, 1610nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx9L 1470 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx9L 1470

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 100km, Single Mode, Dual Fibre, CWDM, 1470nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx9L 1490 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx9L 1490

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 100km, Single Mode, Dual Fibre, CWDM, 1490nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx9L 1510 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx9L 1510

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 100km, Single Mode, Dual Fibre, CWDM, 1510nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx9L 1530 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx9L 1530

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 100km, Single Mode, Dual Fibre, CWDM, 1530nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-CxAL 1510 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-CxAL 1510

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 120km, Single Mode, Dual Fibre, CWDM, 1510nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-CxAL 1530 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-CxAL 1530

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 120km, Single Mode, Dual Fibre, CWDM, 1530nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-CxAL 1550 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-CxAL 1550

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 120km, Single Mode, Dual Fibre, CWDM, 1550nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-CxAL 1570 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-CxAL 1570

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 120km, Single Mode, Dual Fibre, CWDM, 1570nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-CxAL 1590 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-CxAL 1590

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 120km, Single Mode, Dual Fibre, CWDM, 1590nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-CxAL 1610 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-CxAL 1610

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 120km, Single Mode, Dual Fibre, CWDM, 1610nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TBP-CB9L-D 5157 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TBP-CB9L-D 5157

Manufacturer L3 Communications

Coretek

Description:

SFP with DDMI, 155Mb/s, 100km, Single Mode, Single Fibre, 1510/1570nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard Small Form-factor Pluggable (SFP) Footprint
  • Compliant to Multiple Supplier Agreement (MSA)
  • Digital Diagnostic Monitoring Interface (DDMI) Compliant to SFF-8472
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TBP-CB9L-D 5751 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TBP-CB9L-D 5751

Manufacturer L3 Communications

Coretek

Description:

SFP with DDMI, 155Mb/s, 100km, Single Mode, Single Fibre, 1570/1510nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard Small Form-factor Pluggable (SFP) Footprint
  • Compliant to Multiple Supplier Agreement (MSA)
  • Digital Diagnostic Monitoring Interface (DDMI) Compliant to SFF-8472
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB6L 1470 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB6L 1470

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1470nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB6L 1490 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB6L 1490

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1490nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB6L 1510 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB6L 1510

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1510nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB6L 1530 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB6L 1530

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1530nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB6L 1550 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB6L 1550

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1550nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB6L 1570 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB6L 1570

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1570nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB6L 1590 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB6L 1590

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1590nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB8L 1470 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB8L 1470

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1470nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB8L 1490 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB8L 1490

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1490nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB8L 1510 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB8L 1510

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1510nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB8L 1530 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB8L 1530

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1530nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx9L 1550 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx9L 1550

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 100km, Single Mode, Dual Fibre, CWDM, 1550nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx9L 1570 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx9L 1570

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 100km, Single Mode, Dual Fibre, CWDM, 1570nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx9L 1590 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx9L 1590

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 100km, Single Mode, Dual Fibre, CWDM, 1590nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-Cx9L 1610 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-Cx9L 1610

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 100km, Single Mode, Dual Fibre, CWDM, 1610nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-CxAL 1470 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-CxAL 1470

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 120km, Single Mode, Dual Fibre, CWDM, 1470nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-0155TSR-CxAL 1490 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-0155TSR-CxAL 1490

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 155Mb/s, 120km, Single Mode, Dual Fibre, CWDM, 1490nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1212TEF-IF5C-A Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1212TEF-IF5C-A

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 20km, Single Mode, Single Fibre, 1310/1490nm, DFB, -40 to 85°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL Signal Detect
  • Single SC Connector
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1212TEF-IF5P-A Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1212TEF-IF5P-A

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 20km, Single Mode, Single Fibre, 1310/1490nm, DFB, -40 to 85°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • PECL Signal Detect
  • Single SC Connector
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TTR-Kx6C Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TTR-Kx6C

Manufacturer L3 Communications

Coretek

Description:

1x9 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, 1550nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 1x9 Pin Through Hole (PTH) Footprint
  • +3.3V or +5V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex SC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TTR-Kx6C-A Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TTR-Kx6C-A

Manufacturer L3 Communications

Coretek

Description:

1x9 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, 1550nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 1x9 Pin Through Hole (PTH) Footprint
  • +3.3V or +5V Power Supply
  • PECL Differential Electrical Interface
  • PECL or TTL Signal Detect
  • Duplex SC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Solder

Coretek CT-1250TSR-CB6L 1610 Fibre Optic Transceiver, Serial Data, Solder

MPN:

CT-1250TSR-CB6L 1610

Manufacturer L3 Communications

Coretek

Description:

SFF 2x5 PTH, 1.25Gb/s, 40km, Single Mode, Dual Fibre, CWDM, 1610nm, DFB, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard 2x5 Pin Through Hole (PTH) Footprint
  • Compliant with Small Form Factor (SFF) Multi-Source Agreement (MSA)
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Fibre Optic Transceiver, Serial Data, Hot-Plug

Coretek CT-A000NPP-SB1L-D 10 Gigabit Multi-mode Transceiver, SFP+ with Digital Diagnostic Monitoring (DDM)

MPN:

CT-A000NPP-SB1L-D

Manufacturer L3 Communications

Coretek

Description:

SFP+, 11.3Gb/s, 300m, Multi-mode, Dual Fibre, 850nm, VCSEL, 0 to 70°C, RoHS

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Coretek

Features:

  • Industry Standard Small Form-factor Pluggable (SFP+) Footprint
  • Compliant to Multiple Supplier Agreement (MSA) SFF-8431 and SFF-8432
  • Digital Diagnostic Monitoring Interface (DDMI) Compliant to SFF-8472
  • +3.3V Power Supply
  • PECL Differential Electrical Interface
  • TTL Signal Detect
  • Duplex LC Connectors
  • Class 1 Laser Product 21CFR1040.10
  • RoHS Compliant

Mechanical PM switch 2x2

AC Photonics PMS Mechanical Pm Switch 1X2, 1X4, 2X2, 1310Nm Or 1550Nm

MPN:

PMS - 2x2

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's PMS Series switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical Path
  • Latching or Non-Latching

Mechanical fibre optic switch (latching or non-latching), 1x1

AC Photonics MS Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X1 To 1X16, 2X2, Bypass, 4X4

MPN:

MS - 1x1

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series 1x1 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Mechanical fibre optic switch (latching or non-latching), 1x2

AC Photonics MS Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X1 To 1X16, 2X2, Bypass, 4X4

MPN:

MS - 1x2

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series 1x2 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Mechanical fibre optic switch (latching or non-latching), 1x4

AC Photonics MS Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X1 To 1X16, 2X2, Bypass, 4X4

MPN:

MS - 1x4

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series 1x4 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Mechanical fibre optic switch (latching or non-latching), 1x16

AC Photonics MS Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X1 To 1X16, 2X2, Bypass, 4X4

MPN:

MS - 1x16

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series 1x16 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Mechanical fibre optic switch (latching or non-latching), 2x2

AC Photonics MS Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X1 To 1X16, 2X2, Bypass, 4X4

MPN:

MS - 2x2

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series 2x2 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Mechanical fibre optic switch (latching or non-latching), 2x2 Bypass

AC Photonics MS Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X1 To 1X16, 2X2, Bypass, 4X4

MPN:

MS - Bypass

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series 2x2 bypass switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Mechanical fibre optic switch (latching or non-latching), 4x4

AC Photonics MS Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X1 To 1X16, 2X2, Bypass, 4X4

MPN:

MS - 4x4

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series 4x4 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Multi-mode mechanical fibre optic switch (latching or non-latching), 1x2

AC Photonics MMS Multi-Mode Mechanical Fiberoptic Switch(Latching Or Non Latching), 1X2, 2X2

MPN:

MMS - 1x2

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MMS Series multimode 1x2 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fibreoptic switches are true switching solutions for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Multi-mode mechanical fibre optic switch (latching or non-latching), 2x2

AC Photonics MMS Multi-Mode Mechanical Fiberoptic Switch(Latching Or Non Latching), 1X2, 2X2

MPN:

MMS - 2x2

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MMS Series multimode 2x2 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fibreoptic switches are true switching solutions for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Dual mechanical fibre optic switch (latching or non-latching), 1x2

AC Photonics 2MS Dual Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X2, 2X2

MPN:

2MS - 1x2

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series dual 1x2 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Dual mechanical fibre optic switch (latching or non-latching), 2x2

AC Photonics 2MS Dual Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X2, 2X2

MPN:

2MS - 2x2

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series dual 2x2 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

Dual multi-mode mechanical fibre optic switch (latching or non-latching)

AC Photonics 2MMS Dual Multi-Mode Mechanical Fiberoptic Switch(Latching Or Non Latching), 2X2, Bypass

MPN:

2MMS

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics' MMS Series dual 2x2 bypass switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fibreoptic switches are true switching solutions for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • Latching or Non-Latching
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical Path

Mechanical PM switch 1x2

AC Photonics PMS Mechanical Pm Switch 1X2, 1X4, 2X2, 1310Nm Or 1550Nm

MPN:

PMS - 1x2

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's PMS Series switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • High Extinction Ratio
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical Path

Mechanical PM switch 1x4

AC Photonics PMS Mechanical Pm Switch 1X2, 1X4, 2X2, 1310Nm Or 1550Nm

MPN:

PMS - 1x4

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's PMS Series switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • High Extinction Ratio
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical Path

1310nm Butterfly DFB Laser, Direct Modulated, 6-15 dBm, Forward Path

AGX ALM3 1310nm Butterfly DFB Laser, Direct Modulated, 6-15 DBm, Forward Path

MPN:

ALM3

Manufacturer L3 Communications

AGx

Description:

1310nm Butterfly DFB Laser, Direct Modulated, 6-15 dBm, Forward Path The ALM3 series of 1310nm DFB laser modules are designed specifically for use in the transmission of broadband analog signals. Their high linearity makes them especially suitable for CATV broad- and narrowcast applications. All critical components, including optical isolator, TEC, thermistor, laser, and monitor photodiode are hermetically sealed in a butterfly package. Available in output powers from 6-15 dBm.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • Directly modulated DFB lasers
  • OC-48 compatible pinouts
  • 110 channel NTSC loading
  • Internal TEC, thermistor and monitor PD
  • 14 pin butterfly package
  • Up to 15 dBm (31mW) optical output power

Pigtailed Photodiode For Channel Monitoring And Low Bandwidth Applications

AGX PPDD Highly Responsive Inga as Pigtailed Photodiode For Channel Monitoring And Low Bandwidth Applications

MPN:

PPDD

Manufacturer L3 Communications

AGx

Description:

Highly Responsive InGaAs Pigtailed Photodiode For Low Bandwidth Applications The PPDD series module incorporates a highly responsive photodiode sensitive to the communications wavelength range between 1100 nm and 1650 nm. This photodiode is hermetically packaged in an industry standard coaxial package with a single mode fibre pigtail. This module is especially suited as a low cost detector for channel monitoring, as well as low bandwidth applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High sensitivity photodiode
  • Bandwidth to 600 MHz
  • Wide operating temperature range
  • RoHS compliant

Mechanical fibre optic switch (latching or non-latching), 1x8

AC Photonics MS Mechanical Fiberoptic Switch(Latching Or Non-Latching), 1X1 To 1X16, 2X2, Bypass, 4X4

MPN:

MS - 1x8

Manufacturer L3 Communications

AC Photonics

Description:

AC Photonics's MS Series 1x8 switch connects optical channels by redirecting an incoming optical signal into a selected output fibre. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. The Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MS fibreoptic switches are true switching solution for optical networking applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AC Photonics

Features:

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy-Free Optical path
  • Latching or Non-Latching

1310nm Coax DFB Laser, Forward Path, 4-24 mW, more than 2.7 GHz

AGX PLMF3 1310nm Coax DFB Laser, Forward Path, 4-24 Mw, >2.7 GHz

MPN:

PLMF3

Manufacturer L3 Communications

AGx

Description:

1310nm Uncooled Coax DFB Laser, Forward Path, 4-24 mW, >2.7 GHz

The PLMF3 series lasers incorporates a highly linear MQW DFB laser emitting at 1310 nm, hermetically sealed in an industry standard coaxial package with a single mode fibre pigtail. This laser is especially suited as an un-cooled or externally cooled, low cost light source for analogue CATV forward path, as well as intermediate and long reach applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • Low RIN noise
  • Internal optical isolator
  • Internal monitor photodiode
  • Wide operating temperature range
  • RoHS compliant

1310nm Coax DFB Laser, Return Path, 1-4 mW, more than 2 GHz

AGX PLMR3 1310nm Coax DFB Laser, Return Patch, 1-4 Mw, >2 GHz

MPN:

PLMR3

Manufacturer L3 Communications

AGx

Description:

1310nm Uncooled Coax DFB Laser, Return Path, 1-4 mW, >2 GHz The PLMR3 series of modules incorporate highly linear MQW DFB lasers emitting at 1310 nm, hermetically sealed in industry standard coaxial packages with single mode fibre pigtail. These lasers are especially suited as un-cooled, low cost light sources for analogue CATV return path, as well as intermediate and long reach applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High linearity distributed feedback (DFB) laser
  • Low RIN noise
  • Internal optical isolator
  • Internal monitor photodiode
  • Wide operating temperature range
  • RoHS compliant

1550nm Coax DFB Laser, Return Path, 1-4 mW, more than 2 GHz

AGX PLMR5 1550nm Coax DFB  Laser, Return Patch, 1-4 Mw, >2 GHz

MPN:

PLMR5

Manufacturer L3 Communications

AGx

Description:

1550nm Uncooled Coax DFB Laser, Return Path, 1-4 mW, >2 GHz The PLMR5 series module incorporates a highly linear MQW DFB laser emitting at 1550 nm, hermetically sealed in an industry standard coaxial package with a single mode fibre pigtail. This laser is especially suited as an un-cooled, low cost light source for analogue CATV return path, as well as RF over fibre applications.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High linearity distributed feedback (DFB) laser
  • Low RIN noise
  • Internal optical isolator
  • Internal monitor photodiode
  • Wide operating temperature range
  • RoHS compliant

CWDM Coax DFB Laser, Return Path / WCDMA, 1-4 mW, more than 2 GHz

AGX PLMR1 Cad Coax DFB Laser, Return Patch / Wada, 1-4 Mw, >2 GHz

MPN:

PLMR1

Manufacturer L3 Communications

AGx

Description:

CWDM Uncooled Coax DFB Laser, Return Path / WCDMA, 1-4 mW, >2 GHz The PLMR1 series lasers incorporate DFB lasers at the CWDM wavelengths from 1270 nm to 1610 nm and are especially suited for CATV return path. These lasers are also housed in industry standard coaxial packages with single mode fibre pigtails integrated with single or dual optical isolators.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High linearity distributed feedback (DFB) laser
  • Low RIN noise
  • Internal optical isolator
  • Internal monitor photodiode
  • Wide operating temperature range
  • RoHS compliant

1310nm Coax Fabry-Perot Laser, Return Path, 1-2 mW, more than 2 GHz

AGX FPMR3 1310nm Coax Fabry-Perot Laser, Return Path, 1-2 Mw, >2 GHz

MPN:

FPMR3

Manufacturer L3 Communications

AGx

Description:

1310nm Uncooled Coax Fabry-Perot Laser, Return Path, 1-2 mW, >2 GHz The FPMR3 series module incorporates a linear multi-quantum well (MQW) Fabry-Perot (FP) laser emitting at 1310 nm, hermetically sealed in an industry standard coaxial package with a single mode fibre pigtail. This laser is especially suited as an un-cooled, low cost light source for analogue CATV return path.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High reliability linear Multi-Quantum Well Fabry-Perot Lasers
  • Internal monitor photodiode
  • Wide operating temperature range
  • RoHS compliant

1550nm Coax Fabry-Perot Laser, Return Path, 1-2 mW, more than 2 GHz

AGX FPMR5 1550nm Coax Fabry-Perot Laser, Return Path, 1-2 Mw, >2 GHz

MPN:

FPMR5

Manufacturer L3 Communications

AGx

Description:

1550nm Uncooled Coax Fabry-Perot Laser, Return Path, 1-2 mW, >2 GHz The FPMR5 series module incorporates a linear multi-quantum well (MQW) Fabry-Perot (FP) laser emitting at 1550 nm, hermetically sealed in an industry standard coaxial package with a single mode fibre pigtail. This laser is especially suited as an un-cooled, low cost light source for analogue CATV return path.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High reliability linear Multi-Quantum Well Fabry-Perot Lasers
  • Low RIN noise
  • Internal monitor photodiode
  • Wide operating temperature range
  • RoHS compliant

1550nm CW Butterfly DFB Laser, up to 40-60 mW

AGX ALM938 1550nm Butterfly DFB Laser, Cow, Up To 40-60 Mw

MPN:

ALM938 Series

Manufacturer L3 Communications

AGx

Description:

1550nm Butterfly DFB Laser The ALM938 is a high powered DFB laser, operating at 1550 nm in CW mode. It is extremely suitable for use with external modulators. Housed in butterfly packages with internal TECs and isolators, their narrow linewidth (< 1 MHz) generates very low noise (RIN) over fibre. Output is rated from 40 mW to 60 mW through polarization maintaining fibre (PMF).

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • Continuous wave DFB Lasers
  • OC-48 Compatible Pinouts
  • Internal TEC, Thermistor and Monitor PD
  • 14 pin Butterfly Package
  • Up to 60 mW Optical Output Power

Pigtailed Photodiode, more than 3 GHz Bandwidth

AGX PPDA Highly Linear Inga as Pigtailed Photodiode With > 3 GHz Bandwidth

MPN:

PPDA

Manufacturer L3 Communications

AGx

Description:

Highly Linear InGaAs Pigtailed Photodiode With > 3 GHz Bandwidth The PPDA series module incorporates a highly linear photodiode sensitive to the wavelength range between 1100 nm and 1650 nm. This device is in a hermetically sealed coaxial package with a single mode fibre pigtail. It is especially suited for analog CATV intermediate and long reach applications, as well as higher bandwidth satellite and FTTX network

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High linearity, low capacitance photodiode
  • Low back reflection in package
  • Wide RF bandwidth up to 3 GHz
  • Wide operating temperature range
  • RoHS compliant

Receptacle Photodiode For Analogue Applications

RPDA

MPN:

RPDA

Manufacturer L3 Communications

AGx

Description:

Receptacle Photodiode For Analogue Applications The RPDA series photodiodes are equipped with metal SC/APC housing receptacles. These photodiodes are especially suited as low cost detectors for analogue CATV and Satellite video reception.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High sensitivity, low capacitance photodiode
  • High Linearity
  • Wide RF bandwidth to 3 GHz
  • Wide operating temperature range
  • RoHS Compliant

Receptacle Photodiode For Digital Applications

RPDD

MPN:

RPDD

Manufacturer L3 Communications

AGx

Description:

Receptacle Photodiode For Digital Applications The RPDD series photodiodes are equipped with metal SC/APC housing receptacles. These photodiodes are especially suited as low cost detectors for digital applications up to 2.5 Gb/s.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier AGx

Features:

  • High sensitivity, low capacitance photodiode
  • Wide RF bandwidth to 2 GHz
  • Wide operating temperature range
  • RoHS Compliant

Uncooled Analog CoaxiaI Laser for CATV - Return Path

Lightron LDDV31-Txx Uncooled Analog CoaxiaI Laser for CATV - Return Path

MPN:

LDDV31-Txx

Manufacturer L3 Communications

Lightron

Description:

The LDD231 family of uncooled analog InGaAsP/InP MQW-DFB coaxial laser diodes are optimised for forward path CATV applications. Featuring a moulded single-mode fibre pigtale these lasers incorporate an InGaAs monitor PD and single stage isolator and have typical optical output powers of 2mW.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

Features:

  • InGaAsPllnP MQW-DFB Laser Diode with InGaAs Monitor PD
  • High Coupling-efficiency Optical output power
  • Coaxial package with a single mcde fiber pigtailed
  • Single or Double Stage Isolator
  • Full CWDM Band (1270-1610nm)

Analog PIN receiver, receptacle, 1.5GHz, 0.85A/W, 0.7pF, -70 dBc, 1.0 nA

Lightron LP128-RSAx Analog PIN Receiver

MPN:

LP128-RSAx

Manufacturer L3 Communications

Lightron

Description:

The LP128-RSAx is a connectorised (SC/APC) analogue PIN diode from Lightron suitable for CATV applications. The LP128 has a frequency bandwidth of 1.5GHz with a typical responsivity of 0.85A/W, typical capacitance of 0.7pF, typical IMD3 of -70dBc and a maximum dark current of 1.0nA.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

Features:

  • 1.1um to 1.6um Wavelength InGaAs PIN-PD
  • Receptacle(SC/APC) or Pigtailed type package by 3pin coaxial TO
  • Wide Frequency Bandwidth &amp; Wide Input Power Range
  • Low Intermodulation Distortion
  • High Responsivity, Low Back Reflection &amp; Low Dark Current

Analog PIN receiver, SMF pigtail, 2.0GHz, 0.85A/W, 0.4pF, -70dBc, 1.0nA

Lightron LP128-RSAx Analog PIN Receiver

MPN:

LP124-Sxx

Manufacturer L3 Communications

Lightron

Description:

The LP124-Sxx is an analogue PIN diode from Lightron suitable for CATV applications fitted with a moulded single mode fibre pigtail. The LP124 has a frequency bandwidth of 2.0GHz with a typical responsivity of 0.85 A/W, typical capacitance of 0.4pF, typical IMD3 of -70 dBc and a maximum dark current of 1.0 nA.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

Features:

  • 1.1um to 1.6um Wavelength InGaAs PIN-PD
  • Receptacle(SC/APC) or Pigtailed type package by 3pin coaxial TO
  • Wide Frequency Bandwidth &amp; Wide Input Power Range
  • Low Intermodulation Distortion
  • High Responsivity, Low Back Reflection &amp; Low Dark Current

Analog PIN receiver, receptacle, 2.0GHz, 0.85A/W, 0.4pF, -70dBc, 1.0nA

Lightron LP128-RSAx Analog PIN Receiver

MPN:

LP124-RSAx

Manufacturer L3 Communications

Lightron

Description:

The LP124-Sxx is a connectorised (SC/APC) analogue PIN diode from Lightron suitable for CATV applications. The LP124 has a frequency bandwidth of 2.0GHz with a typical responsivity of 0.85A/W, typical capacitance of 0.4pF, typical IMD3 of -70dBc and a maximum dark current of 1.0nA.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

Features:

  • 1.1um to 1.6um Wavelength InGaAs PIN-PD
  • Receptacle(SC/APC) or Pigtailed type package by 3pin coaxial TO
  • Wide Frequency Bandwidth &amp; Wide Input Power Range
  • Low Intermodulation Distortion
  • High Responsivity, Low Back Reflection &amp; Low Dark Current

CWDM SFP : Multi-Protocol Compliance

Lightron SFP24-TS3LC-xyA CWDM SFP : Multi-Protocol Compliance

MPN:

SFP24-TS3LC-xyA

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

CWDM SFP : Multi-Protocol Compliance

Lightron SFP24-US3LC-xyA CWDM SFP : Multi-Protocol Compliance

MPN:

SFP24-US3LC-xyA

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-QU3SC-IVA_1000BASE-BX

MPN:

WSP24-QU3SC-IVA

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-VU3SC-IQA_1000BASE-BX

MPN:

WSP24-VU3SC-IQA

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-3I3LC-IxA_1000BASE-BX

MPN:

WSP24-3I3LC-IxA

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-4I3LC-I3A_1000BASE-BX

MPN:

WSP24-4I3LC-I3A

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-5I3LC-I3A_1000BASE-BX

MPN:

WSP24-5I3LC-I3A

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-3S3LC-IxA_1000BASE-BX

MPN:

WSP24-3S3LC-IxA

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-4S3LC-I3A_1000BASE-BX

MPN:

WSP24-4S3LC-I3A

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-5S3LC-I3A_1000BASE-BX

MPN:

WSP24-5S3LC-I3A

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-3L3LC-IxA_1000BASE-BX

MPN:

WSP24-3L3LC-IxA

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-4L3LC-I3A_1000BASE-BX

MPN:

WSP24-4L3LC-I3A

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of Actives

View our portfolio of Fibre optic components

See all products from our supplier Lightron

DATACOM Application (Bi-Directional SFP) - SC/LC Simplex/TDM

WSP24-5L3LC-I3A_1000BASE-BX

MPN:

WSP24-5L3LC-I3A

Manufacturer L3 Communications

Lightron

Description:

Legacy Pluggable Optics for Telecom and Data Communication. Lightron offers a very comprehensive set of pluggable optical module portfolio for SONET/SDH, 100/1000/10G BASE Ethernet, Fibre Channel, OTN and other consumer applications with market-proven technologies.

View our wide range of