Acal BFi's team of technical experts will be on the Acal BFi stand to discuss your ideas, plans or specific requirements for cutting-edge photonics technology and innovative applications. Hall B2, booth 353.
Ideal for education and startups: Keysight has introduced the DSOX1204A and DSX1204G oscilloscope models, an expansion of the InfiniiVision 1000 X-Series oscilloscopes. These feature four analogue channels at 70MHz, upgradable to 100 and 200 MHz.
With test equipment that is easy to configure and run, you will be able to start collecting and analyzing data faster. The new DAQ970A series of DAQ (data acquisition systems) can measure multiple signal types including volts, current, resistance, temperature, and frequency.
From making battery drain test analysis to measuring DC-DC converter efficiency, now you can do it with less instruments on your bench. Keysight offer a 1U height modular electronic load module for the N6700 family which is capable of supplying power from power module and sink to the e-load module in a single modular mainframe.
Case study: Enabling a globally-recognised brand to stand out in a new market sector with a unique solution
In our latest case study, our close partnership and collaborative approach made the critical difference for our customer Elsap, who came to us with a strict design brief and deadline.
Acal BFi, as TREK's only authorised repair and calibration centre in Europe, provides a comprehensive and efficient repair and calibration service to ensure customers can have absolute confidence in their TREK devices and the results they provide.
If you have used soft magnetic cores you will have experienced "noise", the most common is the hum of transformers in the 50Hz net, but where does this noise come from? Why is it sometimes negligible? And, why does it sometimes reach an unacceptable level?
Acal BFi's specialist CSfMC team offers a variety of services to enable customers to overcome complex EMC challenges and create unique component designs. Come and meet us at EMV 2019, stand C2 318, to discuss your ideas, plans and requirements.
Inductor Design Engineer, Paul Winkler M.Sc. will be presenting his paper "Direct modelling of Inductor Saturation Behaviour in a SPICE-like Transient Analysis" at the 7th International Conference on System Modeling and Optimization (ICSMO) in Rome, from 16-19 February 2019.
SynQor now offer an innovative N+M, glitch-free redundancy feature for their uninterruptible power supplies
SynQor's new redundancy feature can provide systems with the capabilities needed for always-on critical applications, without needing separate, back-up UPS (uninterruptible power supply) systems or units.
When permanently marking a material, for branding or to facilitate tracking through your manufacturing and supply chain, it is very important to find the balance between having enough power to create a mark and not having too much power which could damage the area. Find out more about our laser marking products.
Excelsys have now expanded their range with the new CoolX1000, the industry's only fanless, 1000W, modular power-supply platform with an efficiency of up to 94%. It also offers the most comprehensive feature set and specifications available in the market.
Our engineers are the specialists who combine technology expertise with sector experience to find the right solution for the customer's application and challenges. Read eight examples of where our close partnerships and technical design support has solved customers' design challenges and made the impossible possible.read more
Some applications may require a powder core permeability that is in between the values of the standard range. Additional permeabilities can be achieved by adding an air gap between the two cores; however, this also has a negative impact of fringing flux and the related loses. In our paper, we share how different permeability Sendust E-cores can be combined to create a much fuller range of permeabilities without using an air gap or creating new materials.read more
Electromagnetic compatibility (EMC) is an essential element of any electronics design, as electromagnetic interference (EMI) can disrupt electronic equipment and systems. Understanding how a component will function in the final application is key; however, the impact of different environments can change your test results.
Our Photonics and Imaging technical experts will be at Vision 2018 in Stuttgart, Germany. Come and see us on stand 1H66 to discuss your needs and see some of our innovative products.read more
Visit Acal BFi at Design Automation & Embedded Systems 2018,
7 and 8 November, Mechelen and Eindhoven
We will be attending this year's Design Automation & Embedded Systems event. Come and join us to learn about the latest security, IoT and electronic design technologies, and listen to John Boudewijns' talk on how to get your data into the Cloud safely.read more
Our specialist Power team will be at COMPAMED 2018 for the first time. Come and see us in Hall 8a, stand P35 to discuss your needs and see some of our innovative products.read more
Meet our team of experts at Electronica, Europe's leading exhibition in electronics. Come and see us on stand 233 in hall C3 to discuss your needs and see some of our innovative products. Our sister companies MTC, Myrra, Flux and Variohm will also be there.read more
Meet our team of technical lighting experts at Lux Live, Europe's largest annual lighting event. Come and see us on stand J21 to discuss your needs and see some of our innovative products.read more
Our team of technical experts will be at SPS IPC Drives. Come and see us in hall 10.0 on stand 536 to discuss your ideas, plans or requirements for innovative applications.read more
By using just one magnetic material, you can simplify your design, supply chain and purchasing processes. In the same way, Acal BFi can simplify your ordering, purchasing, delivery and supply chain processes, enabling you to work with a single supplier for all your ferrite material needs.read more
Acal BFi enhance their comprehensive power portfolio to offer high-voltage solutions following new strategic pan-European partnership with Advanced Energy.read more
We are all moving to a future where the fast, continuing innovation in wearable technology is allowing humans to converge with the environment around them, driving a more interactive, intuitive and optimised experience.read more
Controlling and understanding light is critical to many products' commercial success. Do you have access to the light-measurement solution you need?read more
Temperature increases within a component can influence its performance and efficiency, with aging, endurance and life span affected detrimentally over the long term. Read our technical download to find out how we use thermography as a solution to these issues.read more
Case study – using nanocrystalline cores to mitigate EMI issues in electrical ship propulsion systems
Many ship designers are turning to electric propulsion to increase efficiency, reduce fuel consumption and improve reliability of vessels. However, compared with industrial or transportation applications, there are several characteristics unique to ships, and this new generation of power distribution and propulsion system presents engineers with a complex set of EMC challenges.read more
Acal BFi's new pan-European agreement with Rebellion Photonics allows us to offer the only imaging systems in the world that can identify and quantify gas releases in real time.read more
Excelsys Technologies have extended their range of power card modules for the CoolX600 NFF (no fan featured) series modular power supply with their new CmG dual-output 120W power card.read more
Onze Specialist Dirk Faber helpt onze klanten dagelijks bij de beste keuze van warmtebeeldcamera's en andere elektronica test en meetapparatuur. Leer van de vijf aandachtspunten van Dirk bij de keuze van een warmtecameraread more
Acal BFi's new partnership with gas-sensor specialist, Cubic, will provide high-performance, customisable products and solutions to the rising demands of the air-quality-monitoring market.read more
Acal BFi selected as the first European technical partner to bring cutting-edge Airoha (MediaTek Group Company) technology to the IoT sector
Airoha Technology Corporation (Airoha) have selected Acal BFi as the first regional technical partner to bring their systems-on-chip (SoC) solutions to the IoT sector.read more
Improving the accuracy of your SPICE simulations of powder cores by modelling inductor's variable saturation
In this paper, we explain how the change in inductance from applied current can be described mathematically and be considered in a circuit simulation to improve design accuracy, based on the choke design or measurements.read more
Managing price vs performance is integral to making sure you are not paying too much for overly complicated products with unnecessary extras. Acal BFi work with Tucsen because they focus on developing the highest-quality sCMOS cameras and imaging solutions to meet your exact industrial application requirements.read more
Dr Guenther, Head of Custom Services for Magnetic Components (CSfMC), will be presenting the case study "How nanocrystalline cores can reduce EMI from ship propulsion systems" at the Electric & Hybrid Marine World Expo Conference in June 2018.read more
PCIM Europe is one of the most important meeting points for the power and magnetics industry. Come and visit us on stand 435 in Hall 7.read more
Micrometals and Acal BFi. Micrometals are one of the world leaders in the production of high quality, low-cost iron-powder cores - offering an unrivalled customisation service.read more
Discover how your magnetic component designs and applications can benefit from carbonyl iron powder - Using a tried-and-tested material from a different sector.read more
Our portfolio covers every possible power supply scenario. From creating your own bespoke power supply with SynQor bricks, to flexible, user-configurable modular products from Excelsys, internal open-frame designs from SL Power to cost-effective, plug-and-play external supplies from Cincon, we put the power in your industrial application.read more
New 600W CmE power module provides the full potential of the Excelsys CoolX600 power supply with just one power card
Excelsys have released the CmE module for its revolutionary CoolX600 NFF (No Fan Featured) Series power supply which enables users gain the maximum 600W (at 24V(nom) and 25A) from just one power card module.read more
Myrra launch the 48000 series – their smallest, complete AC/DC power supply solution for low-power electronic designs and devices
Myrra have launched their smallest-ever power supply, the 48000 series; available with seven output voltages – 3.3, 5, 9, 12, 15, 18 and 24Vdcread more
Developed by one of the world’s leading suppliers of precision soft magnetic materials and components, Magnetics’ new M material pushes the boundaries of ferrite class materials with a permeability of 15,000µ, one of the highest permeabilities available for ferrite materials.read more
Find out how Acal BFi overcame an almost impossible brief with the latest IoT technology solutions and innovative designread more
Pan-European thermal imaging specialist, Acal BFi, opens the potential of FLIR’s new Lepton 3 micro-camera
Acal BFi, thermal imaging specialist and European leader in advanced technology solutions, is helping enable customers to easily access and design with FLIR´s Lepton® micro-thermal camera series, including the new Lepton 3.read more
Acal BFi advances technology through innovation by supporting designers with their applications and developing new, custom solutions. Our internship programme sees the next generation of engineers complete their academic studies with real-world experience at our Custom Services for Magnetics Components centre in Germany.read more
See the FX30 in action - Acal BFi have teamed the new Sierra Wireless FX30 with the Acal BFi Environmental Sensor Platform to produce this demonstration video of this new cellular gateway.read more
Sierra Wireless Smart SIM gives global access to more networks than any single mobile network operator SIM. Claim 3 FREE Smart SIMs today.
Do you have an application that you are building right now or ready to be tested/launced in the next 8 weeks? Is Mobile connectivity an essential part of your solution? If so why not claim up-to 3 Sierra Wireless Smart SIMs for 15MB of data for up to 3 months.read more
Cincon’s new quarter size brick railway series - including 150W and 50W variants - is designed for the demanding needs and requirements of the rail industry, with full compliance to the EN50155 Railway Standard for use on rolling stock, and EN45545 Railway Standard for fire and smoke.read more
Qioptiq’s world-class laser technology is now available with Acal BFi’s specialist technical integration and design expertise
Acal BFi, the European leader in advanced technology solutions with over 30 years’ experience in photonics and lasers, has partnered with Qioptiq to increase application support and enable more sectors to benefit from Qioptiq’s leading laser technology across Europe.read more
Acal BFi are pleased to announce that all products of GW Instek are now in our portfolio. GW Instek has more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, basic test and measurement instruments to video surveillance systems.read more
Acal BFi signs exclusive pan-European agreement with onboard video and image processing system specialist, SightLine Applications
Acal BFi has entered into an exclusive distribution agreement to provide advanced video processing products from SightLine Applications across Europe.read more
Tommy Kärrman and Antti Silventoinen from our partner ProAnt will give a lecture about the crucial component of a wireless device, the antenna. We are honored that these Swedish specialists will come on behalf of us to the D&E event ‘17 on 11 and 12 October next. We asked them a couple questions in advance.read more
Save up to 50%* on a range of ex-demo test and measurement equipment from brands including Keysight, FLIR, Sefram and BK Precision.read more
Wireless footswitches from Herga Technology bring improved safety and convenience to the medical sector
Medical footswitch and hand control specialist, Herga Technology, have added Bluetooth Low Energy technology to their range of single- and multi-pedal switches, providing the medical sector with a new, convenient and safe wireless solution.read more
See the light – Acal BFi Photonics specialist Rob Satink explains how you generate better light output with holographic diffusersread more
Acal BFi have produced a series of soft magnetic material user guides. Based on decades of experience providing our customers with the solutions they need, we share valuable insight and knowledge of the key materials worth considering.read more
Acal BFi bring unique sensor, switch and motion system solutions offer from the Variohm Group to the European market
Acal BFi have enhanced and extended their specialist and custom solutions offer with sensor, switch and motion system technologies from the Variohm Group.read more
This paper explores an alternative solution to large or multiple air-gaps in power-inductors – lower permeability powder materials.read more
Rob Satink, photonics specialist bij Acal BFi Nederland uit hoe je betere lichtopbrengst genereert en wat holografische diffusers hiermee te maken hebben. Daarom stelden wij hem een aantal vragen.read more
Technology continues to expand at a phenomenal rate, directly impacting the way we go about our day-to-day lives. In our latest white paper we look at how smart beacons and Bluetooth Low Energy technology will drive further change, adding yet more convenience to our everyday lives.read more