SynQor's medical product line, ACuQor, offers the best-in-class solutions for AC/DC power supplies, and are designed to meet an extensive range of medical applications.

Approved to medical standards

ACuQor® medical AC/DC power supplies have been approved to the new stringent IEC60601:2014 (4th Edition). They meet all medical safety specs for cardiac contact without requiring an external isolation transformer, including B, BF, CF or CFD ratings.

Best-in-class performance

The ACuQor® range offers the highest power density in the smallest package sizes available on the market.

• High-efficiency up to 93% at full rated load current
• Delivers up to 1400W of output power (1800W transient)
• Low leakage - IEC60601-1:2014 (4th Edition) compliant
• Type B, BF, CF and defibrillator-proof variants available
• Optional triple output available

The CFQor series of Quarter-Brick DC/DC converters are high-efficiency converters designed for those medical applications that require isolation and leakage current levels that comply with IEC60601-1.

• Outputs 5.0 “ 24V
• 4250Vdc reinforced insulations
• Rated for CF patient contact and defibrillation proof

CF12

• Max power: 105W
• Input voltage: 9-22V continuous / 25V transient

View datasheet

CF24

• Max power: 120W
• Input voltage: 18-36V continuous / 50V transient

View datasheet

CF48

• Max power: 100W
• Input voltage: 34-75V continuous / 100V transient

View datasheet

 

Uninterruptible Power Supplies (UPS)

SynQor’s military Uninterruptible Power Supplies (UPS) are designed and manufactured to comply with a wide range of standards for the extreme environmental and demanding electrical conditions of military applications.

SynQor incorporates field-proven high-efficiency designs and rugged packaging technologies.

• Sealed, weather-proof, shock-proof construction
• Military tough, die-cast aluminum chassis
• 1250W-1500VA; 2500W-3000VA output power (>10 minute run-time at full power)
• Hot swappable internal battery pack (lithium polymer)

The Hi-Rel® series of extremely-reliable DC-DC converters and EMI filters offer the "gold" standard in field-proven, highly-efficency synchronous rectifier technology. This range is designed to meet the most demanding military applications and the highest certification standards.

• Fixed switching frequency
• No opto-isolators
• QorSeal™ packaging

The MilQor® series includes a range of Mil-COTS DC/DC converters, AC and DC filters and Power Factor Correction technology designed to meet the demanding needs of the Military industry. MilQor products are designed and manufactured to comply with a wide range of military standards.

Power Factor Correction

The MPFCQor Power Factor Correction modules, when used in conjunction with a hold-up capacitor, SynQor's high-efficiency MCOTS DC-DC converters and SynQor's MCOTS AC line filter, the MPFCQor will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input.

• High-efficiency up to 94%
• Universal input frequency range: 45-65Hz/360-800Hz
• Up to 1500W output power
• ≥0.99 Power Factor

DC filters/AC line filters/3-Phase AC line filters

SynQor provides DC filters and AC Line filters for the Mil-COTS series of PFC modules and DC-DC converters. SynQor's high-performance filters are designed to comply with military EMI requirements.

• -40°C to +100°C operation
• ±40V input voltage range; ±500V range; 50 - 630V transient (1s)
• Output currents up to 30A
• Stabilizing bulk capacitor and damping resistor included

DC/DC Converters

The MilQor® series of Mil-COT off-the-shelf DC/DC converters are compatible with the industry standard format, operate at a fixed frequency, and follow conservative component derating guidelines. MilQor products are designed and manufactured to comply with a wide range of military standards.

The InQor® series of EMI AC line filters brings SynQor's field-proven technology and manufacturing expertise to the industrial-power-applications marketplace. SynQor's innovative packaging approach is suited for even the most hostile environments.

• Wide input voltage ranges from 85 up to 264Vrms
• -40°C to 100°C operation
• Very low series resistance
• >55dB @ 250kHz differential and common-mode attenuation
• AS9100 and ISO 9001:2008 certified facility

Designed to meet the highest standards

Compatible with the industry standard format, these filters have high differential-mode and common-mode attenuation and low series resistance. They follow conservative component derating guidelines and are designed and manufactured to the highest standards, including EN 60950-1, UL 60950-1 and IEC 61000-4-2.

The PFCQor® module is supplied completely encased to provide protection from the harsh environments seen in many industrial and transportation applications.

High efficiency

The high-efficiency PFCQor® draws a nearly perfect sinusoidal current from a single-phase AC input, when used in conjunction with a holdup capacitor, SynQor's DC/DC converters and SynQor's AC line filter.

• Universal input voltage range: 85-264Vrms
• Universal input frequency range: 45-65Hz / 360-800Hz
• ≥0.99 power factor
• Internal inrush current limit
• Auxiliary 10V bias supply

The InQor® brick converter series is composed of next-generation, board-mountable, isolated, fixed-switching frequency DC/DC converters that use synchronous rectification to achieve extremely high-power conversion efficiency and optimises the heat dissipated by the converter.

Designed for reliability

Each module is designed and supplied ready to survive in the harsh environments seen in many industrial applications.

• High efficiency “ 88-92% at full rated load current
• Delivers full power with minimal derating
• Operating input voltage range: 180-425 V
• Fixed frequency switching provides predictable EMI

AeroQor airborne isolated power factor correction (PFC) modules

SynQor's new range of isolated PFC modules is specifically designed as a COTS Component for airborne applications. The 325W AeroQor APFIC-U-xx module converts 85 to 264VAC, 47 - 63Hz / 360 - 800Hz to low voltage DC in one module. Units can be paralleled.

This module, when used in conjunction with SynQor AeroQor AC line filter and a hold-up capacitor, will draw a nearly perfect sinusoidal current (PF>0.99) from a single phase AC input, enabling designers to reduce a devices power consumption. All SynQor's AeroQor products are designed and manufactured to meet the highest industry standards, for power quality, performance and safety.

• Isolated 325W output power
• Universal input frequency range: 47 - 63Hz / 360 - 800Hz
• Input voltage range: 85-264Vrms
• ≥0.99 power factor
• High efficiency: 92% (230Vrms)
• Internal inrush current limit
• Auxiliary 10V bias supply, primary-side referenced
• Can be paralleled (droop version only)

AeroQor EMI AC line filter modules

SynQor's new AeroQor AC Line Filters are designed specifically to eliminate EMI noise entering avionics devices, suppressing radiation and conduction interference from affecting the other components used in a switching power supply or controller systems. These industry-specific products reduce losses and stop cross talk, even when cables are positioned close to the filter, to give engineers unprecedented levels of design flexibility and safety.

• - 40 to +100°C operation
• 5 Arms output current
• Very low series resistance
• High differential and common-mode attenuation
• All capacitors are safety-rated X7R multi-layer ceramic
• Meets common EMC standards in properly designed system with SynQor APFIC modules.

PowerQor® isolated, high-efficiency, open-frame DC/DC converters

SynQor is the worldwide leader in high-efficiency DC/DC converters for the telecom and datacom industry.

No heatsink required

PowerQor® open-frame DC/DC converters use synchronous rectification to achieve extremely high power conversion efficiency. The power dissipated by the converter is so low that a heatsink is not required, which saves cost, weight, height, and application effort.

Short leadtimes support the flexibility that the worldwide telecom market requires.

• Ultra-high efficiency up to 97%
• Wide input voltage ranges from 18-75V, withstanding up to 100V, 100ms transient for some models
• Fixed frequency switching, low output noise
• No minimum load requirement